{"title":"cable_assembly","description":"","products":[{"product_id":"bk3-1-5-1-2-cee","title":"BK3\/1.5-1.2-CEE - KUPO 19-Pin Break-Out Cable, CEE 16 A, 1.2 m","description":"\u003c!-- Sub-type: P-D (Power cables) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Power Solution\/bk3_1.5-1.2-cee-19-pin-break-out-cable-cee-16a-1-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"BK3\/1.5-1.2-CEE\" data-color=\"NA\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO BK3\/1.5-1.2-CEE is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with CEE 16 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eBreak-out cables sit at the point where a clean multicore run becomes individual fixture feeds. BK3\/1.5-1.2-CEE keeps that transition organized, with H07RN-F rubber cable that stays supple under production handling while resisting oil, grease, weather, and common industrial stress.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e19-pin Soca input fans out to six individual output legs for organized six-circuit distribution\u003c\/li\u003e  \u003cli\u003eEach 1.2 mm leg is terminated with CEE 16 A connectors for the specified fixture or distro standard\u003c\/li\u003e  \u003cli\u003e3 x 1.5 mm² H07RN-F rubber cable provides flexibility and rugged jacket performance\u003c\/li\u003e  \u003cli\u003e450 \/ 750 V working voltage supports professional temporary power cable assembly use\u003c\/li\u003e  \u003cli\u003eRoHS and IEC\/EN 60332-1-2 compliance reference supports production and installation documentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it for stage lighting breakouts, truss or floor distro, touring cable packages, venue multicore runs, rental-house cable inventories, and equipment feeds where a 19-pin Soca input needs six individual output circuits.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eBuilt as a Break-Out cable with one 19-pin Soca input from the PLS-5219 family and six output legs. Match the output connector type, voltage, current, cable cross section, and system wiring plan before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"BK3\/1.5-1.2-CEE | KUPO 19-Pin Break-Out Cable, CEE 16 A, 1.2 m\",  \"description\": \"The KUPO BK3\/1.5-1.2-CEE is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with CEE 16 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Power Solution \u003e Cable \u0026 Assembly \u003e Break-Out Cable\",  \"sku\": \"BK3\/1.5-1.2-CEE\",  \"mpn\": \"BK3\/1.5-1.2-CEE\",  \"material\": \"H07RN-F rubber cable, 3 x 1.5 mm²\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Input\",      \"value\": \"PLS-5219 19-pin input\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output\",      \"value\": \"6 output tails\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 1.5 mm² H07RN-F rubber cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Voltage\",      \"value\": \"450 \/ 750 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-30 °C to +60 °C, conductor max +85 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"RoHS, IEC\/EN 60332-1-2\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Length\",      \"value\": \"1.2 meters per leg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Connector Type\",      \"value\": \"CEE 16 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Build Type\",      \"value\": \"Break-Out, 1 input fan-out to 6 outputs\"    }  ],  \"productID\": \"BK3-1.5-1.2-CEE\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"BK3\/1.5-1.2-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this a break-out or break-in cable?\u003c\/h3\u003e  \u003cp\u003eThis SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is different between the BK3\/1.5 variants?\u003c\/h3\u003e  \u003cp\u003eThe shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose the heavier 2.5 mm² versions instead?\u003c\/h3\u003e  \u003cp\u003e Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a break-out or break-in cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\"}},{\"@type\":\"Question\",\"name\":\"What is different between the BK3\/1.5 variants?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\"}},{\"@type\":\"Question\",\"name\":\"When should I choose the heavier 2.5 mm² versions instead?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\" Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted for BK3\/1.5-1.2-CEE --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Break-out","offer_id":53907573702955,"sku":"BK3-1.5-1.2-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/BK3-1.5-1.2-CEE_b.jpg?v=1782111776"},{"product_id":"bk3-1-5-1-2-pl","title":"BK3\/1.5-1.2-PL - KUPO 19-Pin Break-Out Cable, Powerlead 20 A, 1.2 m","description":"\u003c!-- Sub-type: P-D (Power cables) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Power Solution\/bk3_1.5-1.2-pl-19-pin-break-out-cable-powerlead-20a-1-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"BK3\/1.5-1.2-PL\" data-color=\"NA\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO BK3\/1.5-1.2-PL is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Powerlead 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eBreak-out cables sit at the point where a clean multicore run becomes individual fixture feeds. BK3\/1.5-1.2-PL keeps that transition organized, with H07RN-F rubber cable that stays supple under production handling while resisting oil, grease, weather, and common industrial stress.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e19-pin Soca input fans out to six individual output legs for organized six-circuit distribution\u003c\/li\u003e  \u003cli\u003eEach 1.2 mm leg is terminated with Powerlead 20 A connectors for the specified fixture or distro standard\u003c\/li\u003e  \u003cli\u003e3 x 1.5 mm² H07RN-F rubber cable provides flexibility and rugged jacket performance\u003c\/li\u003e  \u003cli\u003e450 \/ 750 V working voltage supports professional temporary power cable assembly use\u003c\/li\u003e  \u003cli\u003eRoHS and IEC\/EN 60332-1-2 compliance reference supports production and installation documentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it for stage lighting breakouts, truss or floor distro, touring cable packages, venue multicore runs, rental-house cable inventories, and equipment feeds where a 19-pin Soca input needs six individual output circuits.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eBuilt as a Break-Out cable with one 19-pin Soca input from the PLS-5219 family and six output legs. Match the output connector type, voltage, current, cable cross section, and system wiring plan before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"BK3\/1.5-1.2-PL | KUPO 19-Pin Break-Out Cable, Powerlead 20 A, 1.2 m\",  \"description\": \"The KUPO BK3\/1.5-1.2-PL is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Powerlead 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Power Solution \u003e Cable \u0026 Assembly \u003e Break-Out Cable\",  \"sku\": \"BK3\/1.5-1.2-PL\",  \"mpn\": \"BK3\/1.5-1.2-PL\",  \"material\": \"H07RN-F rubber cable, 3 x 1.5 mm²\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Input\",      \"value\": \"PLS-5219 19-pin input\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output\",      \"value\": \"6 output tails\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 1.5 mm² H07RN-F rubber cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Voltage\",      \"value\": \"450 \/ 750 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-30 °C to +60 °C, conductor max +85 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"RoHS, IEC\/EN 60332-1-2\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Length\",      \"value\": \"1.2 meters per leg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Connector Type\",      \"value\": \"Powerlead 20 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Build Type\",      \"value\": \"Break-Out, 1 input fan-out to 6 outputs\"    }  ],  \"productID\": \"BK3-1.5-1.2-PL\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"BK3\/1.5-1.2-PL\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this a break-out or break-in cable?\u003c\/h3\u003e  \u003cp\u003eThis SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is different between the BK3\/1.5 variants?\u003c\/h3\u003e  \u003cp\u003eThe shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose the heavier 2.5 mm² versions instead?\u003c\/h3\u003e  \u003cp\u003e Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a break-out or break-in cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\"}},{\"@type\":\"Question\",\"name\":\"What is different between the BK3\/1.5 variants?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\"}},{\"@type\":\"Question\",\"name\":\"When should I choose the heavier 2.5 mm² versions instead?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\" Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted for BK3\/1.5-1.2-PL --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Break-out","offer_id":53907573735723,"sku":"BK3-1.5-1.2-PL","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/BK3-1.5-1.2-PL_b.jpg?v=1782111777"},{"product_id":"bk3-1-5-1-2-plt1","title":"BK3\/1.5-1.2-PLT1 - KUPO 19-Pin Break-Out Cable, Powerlead T1 20 A, 1.2 m","description":"\u003c!-- Sub-type: P-D (Power cables) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Power Solution\/bk3_1.5-1.2-plt1-19-pin-break-out-cable-powerlead-t1-20a-1-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"BK3\/1.5-1.2-PLT1\" data-color=\"NA\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO BK3\/1.5-1.2-PLT1 is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Powerlead T1 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eBreak-out cables sit at the point where a clean multicore run becomes individual fixture feeds. BK3\/1.5-1.2-PLT1 keeps that transition organized, with H07RN-F rubber cable that stays supple under production handling while resisting oil, grease, weather, and common industrial stress.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e19-pin Soca input fans out to six individual output legs for organized six-circuit distribution\u003c\/li\u003e  \u003cli\u003eEach 1.2 mm leg is terminated with Powerlead T1 20 A connectors for the specified fixture or distro standard\u003c\/li\u003e  \u003cli\u003e3 x 1.5 mm² H07RN-F rubber cable provides flexibility and rugged jacket performance\u003c\/li\u003e  \u003cli\u003e450 \/ 750 V working voltage supports professional temporary power cable assembly use\u003c\/li\u003e  \u003cli\u003eRoHS and IEC\/EN 60332-1-2 compliance reference supports production and installation documentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it for stage lighting breakouts, truss or floor distro, touring cable packages, venue multicore runs, rental-house cable inventories, and equipment feeds where a 19-pin Soca input needs six individual output circuits.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eBuilt as a Break-Out cable with one 19-pin Soca input from the PLS-5219 family and six output legs. Match the output connector type, voltage, current, cable cross section, and system wiring plan before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"BK3\/1.5-1.2-PLT1 | KUPO 19-Pin Break-Out Cable, Powerlead T1 20 A, 1.2 m\",  \"description\": \"The KUPO BK3\/1.5-1.2-PLT1 is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Powerlead T1 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Power Solution \u003e Cable \u0026 Assembly \u003e Break-Out Cable\",  \"sku\": \"BK3\/1.5-1.2-PLT1\",  \"mpn\": \"BK3\/1.5-1.2-PLT1\",  \"material\": \"H07RN-F rubber cable, 3 x 1.5 mm²\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Input\",      \"value\": \"PLS-5219 19-pin input\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output\",      \"value\": \"6 output tails\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 1.5 mm² H07RN-F rubber cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Voltage\",      \"value\": \"450 \/ 750 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-30 °C to +60 °C, conductor max +85 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"RoHS, IEC\/EN 60332-1-2\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Length\",      \"value\": \"1.2 meters per leg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Connector Type\",      \"value\": \"Powerlead T1 20 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Build Type\",      \"value\": \"Break-Out, 1 input fan-out to 6 outputs\"    }  ],  \"productID\": \"BK3-1.5-1.2-PLT1\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"BK3\/1.5-1.2-PLT1\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this a break-out or break-in cable?\u003c\/h3\u003e  \u003cp\u003eThis SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is different between the BK3\/1.5 variants?\u003c\/h3\u003e  \u003cp\u003eThe shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose the heavier 2.5 mm² versions instead?\u003c\/h3\u003e  \u003cp\u003e Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a break-out or break-in cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\"}},{\"@type\":\"Question\",\"name\":\"What is different between the BK3\/1.5 variants?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\"}},{\"@type\":\"Question\",\"name\":\"When should I choose the heavier 2.5 mm² versions instead?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\" Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted for BK3\/1.5-1.2-PLT1 --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Break-out","offer_id":53907573866795,"sku":"BK3-1.5-1.2-PLT1","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/BK3-1.5-1.2-PLT1_b.jpg?v=1782111778"},{"product_id":"bk3-1-5-1-2-schuko","title":"BK3\/1.5-1.2-SCHUKO - KUPO 19-Pin Break-Out Cable, Schuko 13 A, 1.2 m","description":"\u003c!-- Sub-type: P-D (Power cables) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Power Solution\/bk3_1.5-1.2-schuko-19-pin-break-out-cable-schuko-13a-1-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"BK3\/1.5-1.2-SCHUKO\" data-color=\"NA\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO BK3\/1.5-1.2-SCHUKO is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Schuko 13 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eBreak-out cables sit at the point where a clean multicore run becomes individual fixture feeds. BK3\/1.5-1.2-SCHUKO keeps that transition organized, with H07RN-F rubber cable that stays supple under production handling while resisting oil, grease, weather, and common industrial stress.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e19-pin Soca input fans out to six individual output legs for organized six-circuit distribution\u003c\/li\u003e  \u003cli\u003eEach 1.2 mm leg is terminated with Schuko 13 A connectors for the specified fixture or distro standard\u003c\/li\u003e  \u003cli\u003e3 x 1.5 mm² H07RN-F rubber cable provides flexibility and rugged jacket performance\u003c\/li\u003e  \u003cli\u003e450 \/ 750 V working voltage supports professional temporary power cable assembly use\u003c\/li\u003e  \u003cli\u003eRoHS and IEC\/EN 60332-1-2 compliance reference supports production and installation documentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it for stage lighting breakouts, truss or floor distro, touring cable packages, venue multicore runs, rental-house cable inventories, and equipment feeds where a 19-pin Soca input needs six individual output circuits.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eBuilt as a Break-Out cable with one 19-pin Soca input from the PLS-5219 family and six output legs. Match the output connector type, voltage, current, cable cross section, and system wiring plan before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"BK3\/1.5-1.2-SCHUKO | KUPO 19-Pin Break-Out Cable, Schuko 13 A, 1.2 m\",  \"description\": \"The KUPO BK3\/1.5-1.2-SCHUKO is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Schuko 13 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Power Solution \u003e Cable \u0026 Assembly \u003e Break-Out Cable\",  \"sku\": \"BK3\/1.5-1.2-SCHUKO\",  \"mpn\": \"BK3\/1.5-1.2-SCHUKO\",  \"material\": \"H07RN-F rubber cable, 3 x 1.5 mm²\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Input\",      \"value\": \"PLS-5219 19-pin input\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output\",      \"value\": \"6 output tails\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 1.5 mm² H07RN-F rubber cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Voltage\",      \"value\": \"450 \/ 750 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-30 °C to +60 °C, conductor max +85 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"RoHS, IEC\/EN 60332-1-2\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Length\",      \"value\": \"1.2 meters per leg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Connector Type\",      \"value\": \"Schuko 13 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Build Type\",      \"value\": \"Break-Out, 1 input fan-out to 6 outputs\"    }  ],  \"productID\": \"BK3-1.5-1.2-SCHUKO\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"BK3\/1.5-1.2-SCHUKO\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this a break-out or break-in cable?\u003c\/h3\u003e  \u003cp\u003eThis SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is different between the BK3\/1.5 variants?\u003c\/h3\u003e  \u003cp\u003eThe shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose the heavier 2.5 mm² versions instead?\u003c\/h3\u003e  \u003cp\u003e Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a break-out or break-in cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\"}},{\"@type\":\"Question\",\"name\":\"What is different between the BK3\/1.5 variants?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\"}},{\"@type\":\"Question\",\"name\":\"When should I choose the heavier 2.5 mm² versions instead?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\" Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted for BK3\/1.5-1.2-SCHUKO --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Break-out","offer_id":53907573932331,"sku":"BK3-1.5-1.2-SCHUKO","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/BK3-1.5-1.2-SCHUKO_b.jpg?v=1782111779"},{"product_id":"bk3-1-5-1-2","title":"BK3\/1.5-1.2 - KUPO 19-Pin Break-Out Cable, Stage Pin 20 A, 1.2 m","description":"\u003c!-- Sub-type: P-D (Power cables) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Power Solution\/bk3_1.5-1.2-19-pin-break-out-cable-stage-pin-20a-1-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"BK3\/1.5-1.2\" data-color=\"NA\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO BK3\/1.5-1.2 is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Stage Pin 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eBreak-out cables sit at the point where a clean multicore run becomes individual fixture feeds. BK3\/1.5-1.2 keeps that transition organized, with H07RN-F rubber cable that stays supple under production handling while resisting oil, grease, weather, and common industrial stress.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e19-pin Soca input fans out to six individual output legs for organized six-circuit distribution\u003c\/li\u003e  \u003cli\u003eEach 1.2 mm leg is terminated with Stage Pin 20 A connectors for the specified fixture or distro standard\u003c\/li\u003e  \u003cli\u003e3 x 1.5 mm² H07RN-F rubber cable provides flexibility and rugged jacket performance\u003c\/li\u003e  \u003cli\u003e450 \/ 750 V working voltage supports professional temporary power cable assembly use\u003c\/li\u003e  \u003cli\u003eRoHS and IEC\/EN 60332-1-2 compliance reference supports production and installation documentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it for stage lighting breakouts, truss or floor distro, touring cable packages, venue multicore runs, rental-house cable inventories, and equipment feeds where a 19-pin Soca input needs six individual output circuits.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eBuilt as a Break-Out cable with one 19-pin Soca input from the PLS-5219 family and six output legs. Match the output connector type, voltage, current, cable cross section, and system wiring plan before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"BK3\/1.5-1.2 | KUPO 19-Pin Break-Out Cable, Stage Pin 20 A, 1.2 m\",  \"description\": \"The KUPO BK3\/1.5-1.2 is a 19-pin Soca break-out cable assembly that fans one multicore input into six individual 1.2 mm output legs terminated with Stage Pin 20 A connectors. It is built with 3 x 1.5 mm² H07RN-F rubber cable, giving touring and venue crews a rugged break-out option for compact six-circuit power distribution.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Power Solution \u003e Cable \u0026 Assembly \u003e Break-Out Cable\",  \"sku\": \"BK3\/1.5-1.2\",  \"mpn\": \"BK3\/1.5-1.2\",  \"material\": \"H07RN-F rubber cable, 3 x 1.5 mm²\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Input\",      \"value\": \"PLS-5219 19-pin input\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output\",      \"value\": \"6 output tails\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 1.5 mm² H07RN-F rubber cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Voltage\",      \"value\": \"450 \/ 750 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-30 °C to +60 °C, conductor max +85 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"RoHS, IEC\/EN 60332-1-2\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Length\",      \"value\": \"1.2 meters per leg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Connector Type\",      \"value\": \"Stage Pin 20 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Build Type\",      \"value\": \"Break-Out, 1 input fan-out to 6 outputs\"    }  ],  \"productID\": \"BK3-1.5-1.2\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"BK3\/1.5-1.2\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this a break-out or break-in cable?\u003c\/h3\u003e  \u003cp\u003eThis SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is different between the BK3\/1.5 variants?\u003c\/h3\u003e  \u003cp\u003eThe shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose the heavier 2.5 mm² versions instead?\u003c\/h3\u003e  \u003cp\u003e Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a break-out or break-in cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This SKU is a Break-Out cable. It takes one 19-pin Soca input and fans it out to six individual output legs.\"}},{\"@type\":\"Question\",\"name\":\"What is different between the BK3\/1.5 variants?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The shared cable construction is the same 3 x 1.5 mm² H07RN-F, 1.2 mm, six-leg format. The difference is the output connector type on each leg.\"}},{\"@type\":\"Question\",\"name\":\"When should I choose the heavier 2.5 mm² versions instead?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\" Choose the heavier 2.5 mm² family when the system design, connector load, or cable standard requires the larger conductor cross section.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted for BK3\/1.5-1.2 --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Break-out","offer_id":53907574030635,"sku":"BK3-1.5-1.2","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/BK3-1.5-1.2_b.jpg?v=1782111780"},{"product_id":"exe-rj2x5f-05","title":"EXE-RJ2X5 F-05 50 cm CAT6 RJ45 to 5-Pin XLR Female Adapter Cable (EXE-RJ2X5 F-05)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe-rj2x5f-05-50cm-cat6-rj45-to-xlr-5-pin-female-adapter-cable.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE-RJ2X5 F-05\" data-color=\"Black\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE-RJ2X5 F-05 is a 50 cm KUPO CAT6 RJ45 to 5-pin XLR female adapter cable for DMX over Ethernet to conventional XLR patching. It uses high-quality CAT6 UTP 24 AWG black cable, factory-terminated and Fluke-tested for signal performance.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe female XLR version is useful when an RJ45 or EtherCon source needs to feed 5-pin XLR male equipment. It saves the technician from stacking gender adapters at the end of a Cat-cable trunk.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003eRJ45 to 5-pin XLR female format bridges Cat-cable DMX paths to conventional XLR equipment.\u003c\/li\u003e  \u003cli\u003e50 cm standard length keeps the adapter short enough for rack, distro, and fixture patching.\u003c\/li\u003e  \u003cli\u003e CAT6 UTP 24 AWG construction uses pure copper conductor cores for low impedance.\u003c\/li\u003e  \u003cli\u003e8-core twisted pair structure helps minimize interference.\u003c\/li\u003e  \u003cli\u003e Fluke-tested performance gives crews confidence in a small but signal-critical adapter cable.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for console or distro patching, EtherCon trunk breakouts, Cat-cable DMX runs, touring data kits, lighting racks, and fixtures or panels that need a short RJ45-to-XLR bridge.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eSister variant covers the opposite 5-pin XLR gender. Longer lengths are available on request.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE-RJ2X5 F-05 50 cm CAT6 RJ45 to 5-Pin XLR Female Adapter Cable (EXE-RJ2X5 F-05)\",  \"description\": \"The EXE-RJ2X5 F-05 is a 50 cm KUPO CAT6 RJ45 to 5-pin XLR female adapter cable for DMX over Ethernet to conventional XLR patching. It uses high-quality CAT6 UTP 24 AWG black cable, factory-terminated and Fluke-tested for signal performance.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE-RJ2X5 F-05\",  \"mpn\": \"EXE-RJ2X5 F-05\",  \"color\": \"Black\",  \"material\": \" CAT6 UTP 24 AWG cable with black PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Type\",      \"value\": \"CAT6 UTP, 24 AWG, black PVC jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Pure copper conductor cores\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"50 cm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Black\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Application\",      \"value\": \"DMX over Ethernet to XLR adapter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector A\",      \"value\": \"RJ45\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector B\",      \"value\": \"5-pin XLR Female\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Structure\",      \"value\": \"8-core twisted pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Testing\",      \"value\": \"Fluke-tested\"    }  ],  \"productID\": \"EXE-RJ2X5 F-05\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE-RJ2X5 F-05\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this an Ethernet network cable?\u003c\/h3\u003e  \u003cp\u003eIt is a CAT6 RJ45-to-XLR adapter cable for DMX over Ethernet style patching, not a generic long network run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs the standard length 50 cm?\u003c\/h3\u003e  \u003cp\u003eYes. Longer lengths are available on request.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich XLR gender is this version?\u003c\/h3\u003e  \u003cp\u003eEXE-RJ2X5 F-05 terminates to a 5-pin XLR female connector.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is this an Ethernet network cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is a CAT6 RJ45-to-XLR adapter cable for DMX over Ethernet style patching, not a generic long network run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is the standard length 50 cm?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. Longer lengths are available on request.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which XLR gender is this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"EXE-RJ2X5 F-05 terminates to a 5-pin XLR female connector.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Data Cable \/ Distribution","offer_id":53907575832875,"sku":"EXE-RJ2X5F-05","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE-RJ2X5F-05_b.jpg?v=1782111809"},{"product_id":"exe-rj2x5m-05","title":"EXE-RJ2X5M-05 50 cm CAT6 RJ45 to 5-Pin XLR Male Adapter Cable (EXE-RJ2X5M-05)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe-rj2x5m-05-50cm-cat6-rj45-to-xlr-5-pin-male-adapter-cable.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE-RJ2X5M-05\" data-color=\"Black\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE-RJ2X5M-05 is a 50 cm KUPO CAT6 RJ45 to 5-pin XLR male adapter cable for DMX over Ethernet to conventional XLR patching. It uses high-quality CAT6 UTP 24 AWG black cable, factory-terminated and Fluke-tested for signal performance.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe male XLR version is useful when a Cat-cable trunk needs to break out into a 5-pin XLR female fixture, distro panel, or receiving device.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003eRJ45 to 5-pin XLR male format bridges Cat-cable DMX paths to conventional XLR equipment.\u003c\/li\u003e  \u003cli\u003e50 cm standard length keeps the adapter short enough for rack, distro, and fixture patching.\u003c\/li\u003e  \u003cli\u003e CAT6 UTP 24 AWG construction uses pure copper conductor cores for low impedance.\u003c\/li\u003e  \u003cli\u003e8-core twisted pair structure helps minimize interference.\u003c\/li\u003e  \u003cli\u003e Fluke-tested performance gives crews confidence in a small but signal-critical adapter cable.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for console or distro patching, EtherCon trunk breakouts, Cat-cable DMX runs, touring data kits, lighting racks, and fixtures or panels that need a short RJ45-to-XLR bridge.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eSister variant covers the opposite 5-pin XLR gender. Longer lengths are available on request.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE-RJ2X5M-05 50 cm CAT6 RJ45 to 5-Pin XLR Male Adapter Cable (EXE-RJ2X5M-05)\",  \"description\": \"The EXE-RJ2X5M-05 is a 50 cm KUPO CAT6 RJ45 to 5-pin XLR male adapter cable for DMX over Ethernet to conventional XLR patching. It uses high-quality CAT6 UTP 24 AWG black cable, factory-terminated and Fluke-tested for signal performance.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE-RJ2X5M-05\",  \"mpn\": \"EXE-RJ2X5M-05\",  \"color\": \"Black\",  \"material\": \" CAT6 UTP 24 AWG cable with black PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Type\",      \"value\": \"CAT6 UTP, 24 AWG, black PVC jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Pure copper conductor cores\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"50 cm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Black\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Application\",      \"value\": \"DMX over Ethernet to XLR adapter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector A\",      \"value\": \"RJ45\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector B\",      \"value\": \"5-pin XLR Male\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Structure\",      \"value\": \"8-core twisted pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Testing\",      \"value\": \"Fluke-tested\"    }  ],  \"productID\": \"EXE-RJ2X5M-05\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE-RJ2X5M-05\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this an Ethernet network cable?\u003c\/h3\u003e  \u003cp\u003eIt is a CAT6 RJ45-to-XLR adapter cable for DMX over Ethernet style patching, not a generic long network run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs the standard length 50 cm?\u003c\/h3\u003e  \u003cp\u003eYes. Longer lengths are available on request.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich XLR gender is this version?\u003c\/h3\u003e  \u003cp\u003eEXE-RJ2X5M-05 terminates to a 5-pin XLR male connector.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is this an Ethernet network cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is a CAT6 RJ45-to-XLR adapter cable for DMX over Ethernet style patching, not a generic long network run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is the standard length 50 cm?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. Longer lengths are available on request.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which XLR gender is this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"EXE-RJ2X5M-05 terminates to a 5-pin XLR male connector.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Data Cable \/ Distribution","offer_id":53907575898411,"sku":"EXE-RJ2X5M-05","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE-RJ2X5M-05_b.jpg?v=1782111811"},{"product_id":"exe18-1-5-10","title":"EXE18\/1.5-10 19-Pin Multi-Cable Extension, 10 m, 1.5 mm² (EXE18\/1.5-10)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18_1.5-10-19-pin-multi-cable-extension-10m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/1.5-10\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/1.5-10 is a 10 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 10 m version is a useful short extension when the dimmer, rack, or breakout is close but not close enough. It adds reach without adding unnecessary cable weight.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e10 m length extends a 19-pin Soca-compatible multicore run without changing connector format.\u003c\/li\u003e  \u003cli\u003e18 C x 1.5 mm² construction is the lighter-duty cable option in the EXE family.\u003c\/li\u003e  \u003cli\u003e Fine-stranded class 5 copper conductors keep the cable flexible for repeated load-in and load-out.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC jacket gives abrasion resistance for portable entertainment use.\u003c\/li\u003e  \u003cli\u003e Compatible with Socapex 419 and Veam VSC industry-standard 19-pin connector workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for indoor stage multicore extension, dimmer-to-breakout runs, touring power distribution, rental-house cable packages, production installs, and portable entertainment rigs that need six-circuit Soca-compatible extension.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eEquipped with PLS-5219LM input and PLS-5219LF output 19-pin Soca-compatible connectors. For higher-current applications, use EXE18\/2.5 variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/1.5-10 19-Pin Multi-Cable Extension, 10 m, 1.5 mm² (EXE18\/1.5-10)\",  \"description\": \"The EXE18\/1.5-10 is a 10 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/1.5-10\",  \"mpn\": \"EXE18\/1.5-10\",  \"color\": \"Single\",  \"material\": \"18 C x 1.5 mm² multi-core cable with PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"PLS-5219LM in \/ PLS-5219LF out\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18C x 1.5 mm² H07RN-F multicore\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"10 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to +70 °C\"    }  ],  \"productID\": \"EXE18-1.5-10\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/1.5-10\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this the 1.5 mm² version?\u003c\/h3\u003e  \u003cp\u003eYes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eIt uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose 10 m?\u003c\/h3\u003e  \u003cp\u003e Choose 10 m when the run only needs a short extension from rack to breakout or fixture position.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is this the 1.5 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose 10 m?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose 10 m when the run only needs a short extension from rack to breakout or fixture position.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907575996715,"sku":"EXE18-1.5-10","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-1.5-10_b.jpg?v=1782111813"},{"product_id":"exe18-1-5-20","title":"EXE18\/1.5-20 19-Pin Multi-Cable Extension, 20 m, 1.5 mm² (EXE18\/1.5-20)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18_1.5-20-19-pin-multi-cable-extension-20m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/1.5-20\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/1.5-20 is a 20 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 20 m version is the middle working length, long enough for many stage and venue layouts without committing to the bulk of a 30 M run.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e20 m length extends a 19-pin Soca-compatible multicore run without changing connector format.\u003c\/li\u003e  \u003cli\u003e18 C x 1.5 mm² construction is the lighter-duty cable option in the EXE family.\u003c\/li\u003e  \u003cli\u003e Fine-stranded class 5 copper conductors keep the cable flexible for repeated load-in and load-out.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC jacket gives abrasion resistance for portable entertainment use.\u003c\/li\u003e  \u003cli\u003e Compatible with Socapex 419 and Veam VSC industry-standard 19-pin connector workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for indoor stage multicore extension, dimmer-to-breakout runs, touring power distribution, rental-house cable packages, production installs, and portable entertainment rigs that need six-circuit Soca-compatible extension.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eEquipped with PLS-5219LM input and PLS-5219LF output 19-pin Soca-compatible connectors. For higher-current applications, use EXE18\/2.5 variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/1.5-20 19-Pin Multi-Cable Extension, 20 m, 1.5 mm² (EXE18\/1.5-20)\",  \"description\": \"The EXE18\/1.5-20 is a 20 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/1.5-20\",  \"mpn\": \"EXE18\/1.5-20\",  \"color\": \"Single\",  \"material\": \"18 C x 1.5 mm² multi-core cable with PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"PLS-5219LM in \/ PLS-5219LF out\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18C x 1.5 mm² H07RN-F multicore\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"20 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to +70 °C\"    }  ],  \"productID\": \"EXE18-1.5-20\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/1.5-20\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this the 1.5 mm² version?\u003c\/h3\u003e  \u003cp\u003eYes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eIt uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose 20 m?\u003c\/h3\u003e  \u003cp\u003e Choose 20 m for medium stage runs where 10 M is short but 30 M creates unnecessary slack.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is this the 1.5 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose 20 m?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose 20 m for medium stage runs where 10 M is short but 30 M creates unnecessary slack.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576095019,"sku":"EXE18-1.5-20","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-1.5-20_b.jpg?v=1782111814"},{"product_id":"exe18-1-5-30","title":"EXE18\/1.5-30 19-Pin Multi-Cable Extension, 30 m, 1.5 mm² (EXE18\/1.5-30)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18_1.5-30-19-pin-multi-cable-extension-30m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/1.5-30\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/1.5-30 is a 30 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 30 m version gives more placement freedom for larger rooms and longer rack-to-stage distances, while staying in the lighter 1.5 mm² EXE18 cable family.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e30 m length extends a 19-pin Soca-compatible multicore run without changing connector format.\u003c\/li\u003e  \u003cli\u003e18 C x 1.5 mm² construction is the lighter-duty cable option in the EXE family.\u003c\/li\u003e  \u003cli\u003e Fine-stranded class 5 copper conductors keep the cable flexible for repeated load-in and load-out.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC jacket gives abrasion resistance for portable entertainment use.\u003c\/li\u003e  \u003cli\u003e Compatible with Socapex 419 and Veam VSC industry-standard 19-pin connector workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for indoor stage multicore extension, dimmer-to-breakout runs, touring power distribution, rental-house cable packages, production installs, and portable entertainment rigs that need six-circuit Soca-compatible extension.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eEquipped with PLS-5219LM input and PLS-5219LF output 19-pin Soca-compatible connectors. For higher-current applications, use EXE18\/2.5 variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/1.5-30 19-Pin Multi-Cable Extension, 30 m, 1.5 mm² (EXE18\/1.5-30)\",  \"description\": \"The EXE18\/1.5-30 is a 30 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a Soca-compatible extension for indoor portable rigs.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/1.5-30\",  \"mpn\": \"EXE18\/1.5-30\",  \"color\": \"Single\",  \"material\": \"18 C x 1.5 mm² multi-core cable with PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"PLS-5219LM in \/ PLS-5219LF out\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18C x 1.5 mm² H07RN-F multicore\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"30 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to +70 °C\"    }  ],  \"productID\": \"EXE18-1.5-30\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/1.5-30\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this the 1.5 mm² version?\u003c\/h3\u003e  \u003cp\u003eYes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eIt uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose 30 m?\u003c\/h3\u003e  \u003cp\u003e Choose 30 m for longer indoor Soca-compatible multicore runs where extra reach is more important than minimizing cable length.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is this the 1.5 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. This batch is the 18 C x 1.5 mm² lighter-duty EXE18 cable option.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose 30 m?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose 30 m for longer indoor Soca-compatible multicore runs where extra reach is more important than minimizing cable length.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576160555,"sku":"EXE18-1.5-30","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-1.5-30_b.jpg?v=1782111815"},{"product_id":"exe18-1-5-5","title":"EXE18\/1.5-5 19-Pin Multi-Cable Extension, 5 m, 1.5 mm² (EXE18\/1.5-5)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18_1.5-5-19-pin-multi-cable-extension-5m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/1.5-5\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/1.5-5 is a 5 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a compact Soca-compatible extension for short indoor runs.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 5 m version fills the small but common gap between rack, bar, and breakout. It avoids dragging extra coil onto the floor when the position only needs a short extension.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e5 m length solves short rack-to-bar or rack-to-breakout extension needs.\u003c\/li\u003e  \u003cli\u003e18 C x 1.5 mm² construction is the lighter-duty cable option in the EXE family.\u003c\/li\u003e  \u003cli\u003e Fine-stranded class 5 copper conductors keep the cable flexible for repeated handling.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC jacket gives abrasion resistance for portable entertainment use.\u003c\/li\u003e  \u003cli\u003e Compatible with Socapex 419 and Veam VSC 19-pin connector workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for short indoor stage multicore extension, dimmer-to-breakout runs, rental-house cable packages, lighting bars, and portable entertainment rigs where 10 M would create unnecessary slack.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eEquipped with PLS-5219LM input and PLS-5219LF output 19-pin Soca-compatible connectors. For higher-current applications, use EXE18\/2.5 variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/1.5-5 19-Pin Multi-Cable Extension, 5 m, 1.5 mm² (EXE18\/1.5-5)\",  \"description\": \"The EXE18\/1.5-5 is a 5 m KUPO 19-pin multi-cable extension built on MULTI-CORE 18 cable for six-circuit entertainment power distribution. It uses an 18 C x 1.5 mm² cable with PLS-5219LM line male input and PLS-5219LF line female output connectors, giving crews a compact Soca-compatible extension for short indoor runs.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/1.5-5\",  \"mpn\": \"EXE18\/1.5-5\",  \"color\": \"Single\",  \"material\": \"18 C x 1.5 mm² multi-core cable with PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"PLS-5219LM in \/ PLS-5219LF out\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18C x 1.5 mm² H07RN-F multicore\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"5 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to +70 °C\"    }  ],  \"productID\": \"EXE18-1.5-5\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/1.5-5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen does the 5 m length make sense?\u003c\/h3\u003e  \u003cp\u003eUse it when the connection is close and a longer multicore would create excess slack on the floor.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this the lighter 1.5 mm² cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is the 18 C x 1.5 mm² EXE18 option.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eIt uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"When does the 5 m length make sense?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Use it when the connection is close and a longer multicore would create excess slack on the floor.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is this the lighter 1.5 mm² cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is the 18 C x 1.5 mm² EXE18 option.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It uses PLS-5219LM line male input and PLS-5219LF line female output connectors.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576258859,"sku":"EXE18-1.5-5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-1.5-5_b.jpg?v=1782111817"},{"product_id":"exe18-2-5-10","title":"EXE18\/2.5-10 18-Core Multi-Cable Extension, 10 m, 2.5 mm² (EXE18\/2.5-10)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18-2-5-10-multi-cable-extension-10m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/2.5-10\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/2.5-10 is a 10 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 10 mm length is practical when the rack is nearby but the load still needs a clean inline extension. The heavier 2.5 mm² cross-section is the main reason to choose this family over the 1.5 mm² versions when the power package calls for it.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e18 C x 2.5 mm² cable construction gives the EXE family a heavier cross-section option for higher-current planning.\u003c\/li\u003e  \u003cli\u003e10 mm length supports short-to-medium distro and lighting-bar distances without unnecessary cable slack.\u003c\/li\u003e  \u003cli\u003eStranded class 5 copper conductors provide flexibility for portable power distribution.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC outer jacket complies with IEC 60332-3-24.\u003c\/li\u003e  \u003cli\u003ePLS-5219LM and PLS-5219LF terminations keep the extension inline with 19-pin Soca-compatible workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for six-circuit entertainment power distribution, distro-to-bar extension, touring and rental power packages, indoor stage runs, production installs, and portable lighting systems that need the heavier 2.5 mm² cable option.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eAvailable in 5, 10, 20, and 30 mm lengths. For two-output break-out \/ fan-out assemblies, see the TF18\/2.5 series.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/2.5-10 18-Core Multi-Cable Extension, 10 m, 2.5 mm² (EXE18\/2.5-10)\",  \"description\": \"The EXE18\/2.5-10 is a 10 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/2.5-10\",  \"mpn\": \"EXE18\/2.5-10\",  \"color\": \"Single\",  \"material\": \"18 C x 2.5 mm² multi-cable with self-extinguishing PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Assembly\",      \"value\": \"18 C x 2.5 mm² + PLS-5219 pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Class 5 copper, IEC 60228, 48 x 0.25 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"10 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"PVC insulation \/ self-extinguishing jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Construction\",      \"value\": \"KUPO KHPC18x2.5\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to 70 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.4 +\/- 0.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    }  ],  \"productID\": \"EXE18-2.5-10\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/2.5-10\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this different from the 1.5 mm² EXE18 cable?\u003c\/h3\u003e  \u003cp\u003eThis version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are on the cable?\u003c\/h3\u003e  \u003cp\u003eIt is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose this length?\u003c\/h3\u003e  \u003cp\u003eThe 10 mm length is practical when the rack is nearby but the load still needs a clean inline extension.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"How is this different from the 1.5 mm² EXE18 cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"This version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are on the cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose this length?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 10 mm length is practical when the rack is nearby but the load still needs a clean inline extension.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576357163,"sku":"EXE18-2.5-10","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-2.5-10_b.jpg?v=1782111820"},{"product_id":"exe18-2-5-20","title":"EXE18\/2.5-20 18-Core Multi-Cable Extension, 20 m, 2.5 mm² (EXE18\/2.5-20)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18-2-5-20-multi-cable-extension-20m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/2.5-20\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/2.5-20 is a 20 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 20 mm length is the middle working choice for many venues, giving reach without committing to the full 30 mm coil. The heavier 2.5 mm² cross-section is the main reason to choose this family over the 1.5 mm² versions when the power package calls for it.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e18 C x 2.5 mm² cable construction gives the EXE family a heavier cross-section option for higher-current planning.\u003c\/li\u003e  \u003cli\u003e20 mm length supports medium stage runs and common rack-to-bar distances.\u003c\/li\u003e  \u003cli\u003eStranded class 5 copper conductors provide flexibility for portable power distribution.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC outer jacket complies with IEC 60332-3-24.\u003c\/li\u003e  \u003cli\u003ePLS-5219LM and PLS-5219LF terminations keep the extension inline with 19-pin Soca-compatible workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for six-circuit entertainment power distribution, distro-to-bar extension, touring and rental power packages, indoor stage runs, production installs, and portable lighting systems that need the heavier 2.5 mm² cable option.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eAvailable in 5, 10, 20, and 30 mm lengths. For two-output break-out \/ fan-out assemblies, see the TF18\/2.5 series.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/2.5-20 18-Core Multi-Cable Extension, 20 m, 2.5 mm² (EXE18\/2.5-20)\",  \"description\": \"The EXE18\/2.5-20 is a 20 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/2.5-20\",  \"mpn\": \"EXE18\/2.5-20\",  \"color\": \"Single\",  \"material\": \"18 C x 2.5 mm² multi-cable with self-extinguishing PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Assembly\",      \"value\": \"18 C x 2.5 mm² + PLS-5219 pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Class 5 copper, IEC 60228, 48 x 0.25 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"20 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"PVC insulation \/ self-extinguishing jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Construction\",      \"value\": \"KUPO KHPC18x2.5\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to 70 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.4 +\/- 0.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    }  ],  \"productID\": \"EXE18-2.5-20\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/2.5-20\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this different from the 1.5 mm² EXE18 cable?\u003c\/h3\u003e  \u003cp\u003eThis version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are on the cable?\u003c\/h3\u003e  \u003cp\u003eIt is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose this length?\u003c\/h3\u003e  \u003cp\u003eThe 20 mm length is the middle working choice for many venues, giving reach without committing to the full 30 mm coil.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"How is this different from the 1.5 mm² EXE18 cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"This version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are on the cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose this length?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 20 mm length is the middle working choice for many venues, giving reach without committing to the full 30 mm coil.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576422699,"sku":"EXE18-2.5-20","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-2.5-20_b.jpg?v=1782111820"},{"product_id":"exe18-2-5-30","title":"EXE18\/2.5-30 18-Core Multi-Cable Extension, 30 m, 2.5 mm² (EXE18\/2.5-30)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18-2-5-30-multi-cable-extension-30m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/2.5-30\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/2.5-30 is a 30 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 30 mm length gives the most reach in this group for larger rooms and longer distro placement. The heavier 2.5 mm² cross-section is the main reason to choose this family over the 1.5 mm² versions when the power package calls for it.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e18 C x 2.5 mm² cable construction gives the EXE family a heavier cross-section option for higher-current planning.\u003c\/li\u003e  \u003cli\u003e30 mm length supports longer indoor Soca-compatible multicore paths.\u003c\/li\u003e  \u003cli\u003eStranded class 5 copper conductors provide flexibility for portable power distribution.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC outer jacket complies with IEC 60332-3-24.\u003c\/li\u003e  \u003cli\u003ePLS-5219LM and PLS-5219LF terminations keep the extension inline with 19-pin Soca-compatible workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for six-circuit entertainment power distribution, distro-to-bar extension, touring and rental power packages, indoor stage runs, production installs, and portable lighting systems that need the heavier 2.5 mm² cable option.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eAvailable in 5, 10, 20, and 30 mm lengths. For two-output break-out \/ fan-out assemblies, see the TF18\/2.5 series.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/2.5-30 18-Core Multi-Cable Extension, 30 m, 2.5 mm² (EXE18\/2.5-30)\",  \"description\": \"The EXE18\/2.5-30 is a 30 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/2.5-30\",  \"mpn\": \"EXE18\/2.5-30\",  \"color\": \"Single\",  \"material\": \"18 C x 2.5 mm² multi-cable with self-extinguishing PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Assembly\",      \"value\": \"18 C x 2.5 mm² + PLS-5219 pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Class 5 copper, IEC 60228, 48 x 0.25 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"30 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"PVC insulation \/ self-extinguishing jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Construction\",      \"value\": \"KUPO KHPC18x2.5\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to 70 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.4 +\/- 0.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    }  ],  \"productID\": \"EXE18-2.5-30\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/2.5-30\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this different from the 1.5 mm² EXE18 cable?\u003c\/h3\u003e  \u003cp\u003eThis version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are on the cable?\u003c\/h3\u003e  \u003cp\u003eIt is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose this length?\u003c\/h3\u003e  \u003cp\u003eThe 30 mm length gives the most reach in this group for larger rooms and longer distro placement.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"How is this different from the 1.5 mm² EXE18 cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"This version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are on the cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose this length?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 30 mm length gives the most reach in this group for larger rooms and longer distro placement.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576488235,"sku":"EXE18-2.5-30","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-2.5-30_b.jpg?v=1782111821"},{"product_id":"exe18-2-5-5","title":"EXE18\/2.5-5 18-Core Multi-Cable Extension, 5 m, 2.5 mm² (EXE18\/2.5-5)","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: exe18-2-5-5-multi-cable-extension-5m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"EXE18\/2.5-5\" data-color=\"Single\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe EXE18\/2.5-5 is a 5 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 5 mm length is for short inline jumps where the heavier 2.5 mm² cable is required but extra length would only add clutter. The heavier 2.5 mm² cross-section is the main reason to choose this family over the 1.5 mm² versions when the power package calls for it.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e18 C x 2.5 mm² cable construction gives the EXE family a heavier cross-section option for higher-current planning.\u003c\/li\u003e  \u003cli\u003e5 mm length supports short distro-to-bar jumps and close equipment positions.\u003c\/li\u003e  \u003cli\u003eStranded class 5 copper conductors provide flexibility for portable power distribution.\u003c\/li\u003e  \u003cli\u003eSelf-extinguishing flame-retardant PVC outer jacket complies with IEC 60332-3-24.\u003c\/li\u003e  \u003cli\u003ePLS-5219LM and PLS-5219LF terminations keep the extension inline with 19-pin Soca-compatible workflows.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUsed for six-circuit entertainment power distribution, distro-to-bar extension, touring and rental power packages, indoor stage runs, production installs, and portable lighting systems that need the heavier 2.5 mm² cable option.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eAvailable in 5, 10, 20, and 30 mm lengths. For two-output break-out \/ fan-out assemblies, see the TF18\/2.5 series.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"EXE18\/2.5-5 18-Core Multi-Cable Extension, 5 m, 2.5 mm² (EXE18\/2.5-5)\",  \"description\": \"The EXE18\/2.5-5 is a 5 m factory-terminated 18-core multi-cable extension for portable entertainment power distribution. It carries six circuits over a single 18 x 2.5 mm² jacketed run, with PLS-5219LM line male and PLS-5219LF line female connectors for inline extension between distro boxes, lighting bars, and Soca-compatible power systems.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"sku\": \"EXE18\/2.5-5\",  \"mpn\": \"EXE18\/2.5-5\",  \"color\": \"Single\",  \"material\": \"18 C x 2.5 mm² multi-cable with self-extinguishing PVC jacket\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Assembly\",      \"value\": \"18 C x 2.5 mm² + PLS-5219 pair\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Class 5 copper, IEC 60228, 48 x 0.25 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"5 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"PVC insulation \/ self-extinguishing jacket\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Construction\",      \"value\": \"KUPO KHPC18x2.5\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 °C to 70 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.4 +\/- 0.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    }  ],  \"productID\": \"EXE18-2.5-5\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"EXE18\/2.5-5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this different from the 1.5 mm² EXE18 cable?\u003c\/h3\u003e  \u003cp\u003eThis version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich connectors are on the cable?\u003c\/h3\u003e  \u003cp\u003eIt is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen should I choose this length?\u003c\/h3\u003e  \u003cp\u003eThe 5 mm length is for short inline jumps where the heavier 2.5 mm² cable is required but extra length would only add clutter.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"How is this different from the 1.5 mm² EXE18 cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"This version uses 18 x 2.5 mm² conductors, giving the EXE family a heavier cable option for higher-current planning.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which connectors are on the cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It is terminated with PLS-5219LM on one end and PLS-5219LF on the other.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When should I choose this length?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 5 mm length is for short inline jumps where the heavier 2.5 mm² cable is required but extra length would only add clutter.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Extension","offer_id":53907576553771,"sku":"EXE18-2.5-5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/EXE18-2.5-5_b.jpg?v=1782111822"},{"product_id":"kcwdp222tbk","title":"KUPO KCWDP222TBK Portable DMX Data Cable - 1 Pair, 22 AWG","description":"\u003c!-- Sub-type: P-E --\u003e\u003c!-- Source: from_catalog\\kcwdp222tbk-portable-dmx-data-cable-1-pair-22-awg.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWDP222TBK\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWDP222TBK Portable DMX Data Cable is built for professional lighting control runs that need stable signal behavior and a flexible jacket. It combines 22 AWG (American Wire Gauge) tinned-copper conductors, foamed polyethylene insulation, 100% aluminum\/mylar foil shielding, and a dedicated tinned-copper drain wire inside a matte black soft-PVC jacket.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe single-pair format is compact and direct, making it a practical cable stock for one DMX512 universe per run. The cable is specified for DMX512 use, with ETL-verified performance, flame-retardant construction, and a jacket designed to resist UV and fungus during portable production work.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e1 twisted pair \/ 2 core construction for DMX512 control wiring\u003c\/li\u003e \u003cli\u003e Flexible construction supports portable use and tight bends\u003c\/li\u003e \u003cli\u003e Foamed-PE insulation on red and blue conductors helps maintain low capacitance\u003c\/li\u003e \u003cli\u003e100% aluminum\/mylar foil shield with 22 AWG tinned-copper drain wire\u003c\/li\u003e \u003cli\u003eMatte black soft-PVC jacket (RAL 9005) is flame-retardant, UV\/fungus resistant, and ETL-verified for DMX512 performance\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWDP222TBK is suitable for DMX512 control runs, console-to-dimmer links, trunk-line distribution, universe wiring, portable rental rigs, touring systems, theatres, architectural lighting, and themed environments.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWDP222TBK where a 1-pair DMX512 data cable is appropriate. The conductor colors are red and blue, and the working \/ test voltage rating is 30 V \/ 500 V.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWDP222TBK\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWDP222TBK intended for DMX512 lighting control?\u003c\/h3\u003e  \u003cp\u003eYes. The specification describes it as a professional DMX data cable with ETL-verified DMX512 performance.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy does the cable use foil shielding and a drain wire?\u003c\/h3\u003e  \u003cp\u003eThe 100% aluminum\/mylar foil shield and tinned-copper drain wire help maintain signal integrity in portable lighting-control environments.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eShould I choose the 1-pair version?\u003c\/h3\u003e  \u003cp\u003e Choose the 1-pair version when you need a single DMX512 universe in one compact cable run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWDP222TBK Portable DMX Data Cable - 1 Pair, 22 AWG\",  \"sku\": \"KCWDP222TBK\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Accessories\",  \"description\": \"KUPO KCWDP222TBK is a matte black portable DMX512 data cable with 1 twisted pair, 22 AWG tinned-copper conductors, foil shielding, and ETL-verified DMX performance.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Portable DMX data cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"22 AWG (0.34 mm²) tinned copper, 16\/0.20 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Matte black (RAL 9005)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pair Count \/ Cores\",      \"value\": \"1 twisted pair \/ 2 cores\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"DC Resistance\",      \"value\": \"1.0758 Ohms \/ 100 m at 20 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation\",      \"value\": \"Foamed PE, color-coded red and blue\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Overall Diameter\",      \"value\": \"5.2 mm +\/- 0.3 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Characteristic Impedance\",      \"value\": \"76.3 Ohms at 250 MHz\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Range\",      \"value\": \"-40 to +80 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working \/ Test Voltage\",      \"value\": \"30 V \/ 500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"CE Directive 72\/23\/EEC; IEC 332 Part 1 flame\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Performance\",      \"value\": \"ETL-verified for DMX512 performance\"    }  ],  \"mpn\": \"KCWDP222TBK\",  \"productID\": \"KCWDP222TBK\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWDP222TBK intended for DMX512 lighting control?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. The specification describes it as a professional DMX data cable with ETL-verified DMX512 performance.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why does the cable use foil shielding and a drain wire?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 100% aluminum\/mylar foil shield and tinned-copper drain wire help maintain signal integrity in portable lighting-control environments.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Should I choose the 1-pair version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose the 1-pair version when you need a single DMX512 universe in one compact cable run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Data Cable \/ Distribution","offer_id":53907591299371,"sku":"KCWDP222TBK","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWDP222TBK_b.jpg?v=1782111883"},{"product_id":"kcwdp224tbk","title":"KUPO KCWDP224TBK Portable DMX Data Cable - 2 Pair, 22 AWG","description":"\u003c!-- Sub-type: P-E --\u003e\u003c!-- Source: from_catalog\\kcwdp224tbk-portable-dmx-data-cable-2-pair-22-awg.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWDP224TBK\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWDP224TBK Portable DMX Data Cable is built for professional lighting control runs that need stable signal behavior and a flexible jacket. It combines 22 AWG (American Wire Gauge) tinned-copper conductors, foamed polyethylene insulation, 100% aluminum\/mylar foil shielding, and a dedicated tinned-copper drain wire inside a matte black soft-PVC jacket.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe dual-pair format gives lighting crews two DMX512 universes in one jacket, which can simplify trunk lines and universe distribution. The cable is specified for DMX512 use, with ETL-verified performance, flame-retardant construction, and a jacket designed to resist UV and fungus during portable production work.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e2 twisted pair \/ 4 core construction for DMX512 control wiring\u003c\/li\u003e \u003cli\u003e Flexible construction supports portable use and tight bends\u003c\/li\u003e \u003cli\u003e Foamed-PE insulation on color-coded pairs helps maintain low capacitance\u003c\/li\u003e \u003cli\u003e100% aluminum\/mylar foil shield with 22 AWG tinned-copper drain wire\u003c\/li\u003e \u003cli\u003eMatte black soft-PVC jacket (RAL 9005) is flame-retardant, UV\/fungus resistant, and ETL-verified for DMX512 performance\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWDP224TBK is suitable for DMX512 control runs, console-to-dimmer links, trunk-line distribution, universe wiring, portable rental rigs, touring systems, theatres, architectural lighting, and themed environments.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWDP224TBK where a 2-pair DMX512 data cable is appropriate. The conductor colors are red\/blue and white\/green, and the working \/ test voltage rating is 30 V \/ 500 V.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWDP224TBK\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWDP224TBK intended for DMX512 lighting control?\u003c\/h3\u003e  \u003cp\u003eYes. The specification describes it as a professional DMX data cable with ETL-verified DMX512 performance.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy does the cable use foil shielding and a drain wire?\u003c\/h3\u003e  \u003cp\u003eThe 100% aluminum\/mylar foil shield and tinned-copper drain wire help maintain signal integrity in portable lighting-control environments.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eShould I choose the 2-pair version?\u003c\/h3\u003e  \u003cp\u003e Choose the 2-pair version when you want two DMX512 universes available within one jacket.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWDP224TBK Portable DMX Data Cable - 2 Pair, 22 AWG\",  \"sku\": \"KCWDP224TBK\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Accessories\",  \"description\": \"KUPO KCWDP224TBK is a matte black portable DMX512 data cable with 2 twisted pair, 22 AWG tinned-copper conductors, foil shielding, and ETL-verified DMX performance.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Portable DMX data cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"22 AWG (0.34 mm²) tinned copper, 16\/0.20 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Matte black (RAL 9005)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pair Count \/ Cores\",      \"value\": \"2 twisted pair \/ 4 cores\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"DC Resistance\",      \"value\": \"1.0863 Ohms \/ 100 m at 20 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation\",      \"value\": \"Foamed PE, red\/blue + white\/green\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Overall Diameter\",      \"value\": \"8.3 mm +\/- 0.3 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Characteristic Impedance\",      \"value\": \"99.4 Ohms at 250 MHz\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Range\",      \"value\": \"-40 to +80 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working \/ Test Voltage\",      \"value\": \"30 V \/ 500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"CE Directive 72\/23\/EEC; IEC 332 Part 1 flame\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Performance\",      \"value\": \"ETL-verified for DMX512 performance\"    }  ],  \"mpn\": \"KCWDP224TBK\",  \"productID\": \"KCWDP224TBK\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWDP224TBK intended for DMX512 lighting control?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. The specification describes it as a professional DMX data cable with ETL-verified DMX512 performance.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why does the cable use foil shielding and a drain wire?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 100% aluminum\/mylar foil shield and tinned-copper drain wire help maintain signal integrity in portable lighting-control environments.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Should I choose the 2-pair version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose the 2-pair version when you want two DMX512 universes available within one jacket.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Data Cable \/ Distribution","offer_id":53907591397675,"sku":"KCWDP224TBK","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWDP224TBK_b.jpg?v=1782111883"},{"product_id":"kcwpvc1x100","title":"KUPO KCWPVC1x100 Power Cable, Single-Core IV - 100 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x100-kupo-power-cable-single-core-iv-100mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x100\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x100 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 100 mm² size sits at the heavy end of the single-core range, so it is aimed at high-current feeder work where resistance, termination hardware, and protection all need to be planned carefully. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e100 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 380 A with maximum resistance of 0.19 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 2.30 mm jacket thickness\u003c\/li\u003e \u003cli\u003e18.6 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x100 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x100 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 18.6 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x100\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x100 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 100 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 100 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 18.6 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x100 Power Cable, Single-Core IV - 100 mm²\",  \"sku\": \"KCWPVC1x100\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x100 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"100 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"2.30 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"18.6 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"380 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"0.19 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X100\",  \"productID\": \"KCWPVC1X100\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x100 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 100 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 100 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 18.6 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591495979,"sku":"KCWPVC1x100","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X100_b.jpg?v=1782111886"},{"product_id":"kcwpvc1x14","title":"KUPO KCWPVC1x14 Power Cable, Single-Core IV - 14 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x14-kupo-power-cable-single-core-iv-14mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x14\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x14 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 14 mm² size gives crews a smaller single-core option for lower-current feeder paths where flexibility and compact routing matter. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e14 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 105 A with maximum resistance of 1.40 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.20 mm jacket thickness\u003c\/li\u003e \u003cli\u003e7.5 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x14 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x14 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 7.5 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x14\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x14 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 14 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 14 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 7.5 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x14 Power Cable, Single-Core IV - 14 mm²\",  \"sku\": \"KCWPVC1x14\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x14 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"14 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.20 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"7.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"105 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"1.40 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X14\",  \"productID\": \"KCWPVC1X14\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x14 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 14 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 14 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 7.5 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591561515,"sku":"KCWPVC1x14","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X14_b.jpg?v=1782111886"},{"product_id":"kcwpvc1x22","title":"KUPO KCWPVC1x22 Power Cable, Single-Core IV - 22 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x22-kupo-power-cable-single-core-iv-22mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x22\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x22 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 22 mm² size is a middle step for single-core builds that need more current capacity than the smallest feeder while staying easier to route than the larger jacket sizes. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e22 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 145 A with maximum resistance of 0.90 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.65 mm jacket thickness\u003c\/li\u003e \u003cli\u003e10.3 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x22 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x22 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 10.3 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x22\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x22 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 22 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 22 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 10.3 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x22 Power Cable, Single-Core IV - 22 mm²\",  \"sku\": \"KCWPVC1x22\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x22 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"22 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.65 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"10.3 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"145 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"0.90 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X22\",  \"productID\": \"KCWPVC1X22\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x22 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 22 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 22 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 10.3 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591594283,"sku":"KCWPVC1x22","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X22_b.jpg?v=1782111887"},{"product_id":"kcwpvc1x30","title":"KUPO KCWPVC1x30 Power Cable, Single-Core IV - 30 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x30-kupo-power-cable-single-core-iv-30mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x30\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x30 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 30 mm² size gives a practical balance between ampacity and handling for single-pole power systems that see regular setup and teardown. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e30 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 165 A with maximum resistance of 0.60 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 2.00 mm jacket thickness\u003c\/li\u003e \u003cli\u003e11.4 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x30 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x30 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 11.4 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x30\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x30 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 30 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 30 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 11.4 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x30 Power Cable, Single-Core IV - 30 mm²\",  \"sku\": \"KCWPVC1x30\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x30 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"30 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"2.00 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"11.4 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"165 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"0.60 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X30\",  \"productID\": \"KCWPVC1X30\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x30 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 30 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 30 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 11.4 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591627051,"sku":"KCWPVC1x30","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X30_b.jpg?v=1782111888"},{"product_id":"kcwpvc1x38","title":"KUPO KCWPVC1x38 Power Cable, Single-Core IV - 38 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x38-kupo-power-cable-single-core-iv-38mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x38\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x38 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 38 mm² size is useful when the build steps into heavier single-pole feeder territory but still needs a cable that can be managed by a working crew. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e38 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 200 A with maximum resistance of 0.50 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 2.15 mm jacket thickness\u003c\/li\u003e \u003cli\u003e13.0 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x38 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x38 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 13.0 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x38\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x38 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 38 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 38 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 13.0 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x38 Power Cable, Single-Core IV - 38 mm²\",  \"sku\": \"KCWPVC1x38\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x38 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"38 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"2.15 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"13.0 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"200 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"0.50 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X38\",  \"productID\": \"KCWPVC1X38\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x38 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 38 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 38 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 13.0 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591725355,"sku":"KCWPVC1x38","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X38_b.jpg?v=1782111889"},{"product_id":"kcwpvc1x80","title":"KUPO KCWPVC1x80 Power Cable, Single-Core IV - 80 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc1x80-kupo-power-cable-single-core-iv-80mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC1x80\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC1x80 Power Cable is a flexible single-core IV feeder for portable power distribution and fixed installation work. Its fine-stranded copper conductor helps the cable stay manageable during repeated handling, while PVC insulation and a PVC outer sheath give the jacket a clean strip, smooth gland fit, and dependable field durability.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis 80 mm² size is designed for substantial feeder runs where higher current capacity is needed before moving to the largest 100 mm² cable in the family. The 600 V rating and 105 °C temperature rating make this size useful for professional power builds where the cable has to carry current confidently but still coil, route, and terminate without fighting the crew.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e80 mm² single-core IV copper conductor for feeder and single-pole assemblies\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 320 A with maximum resistance of 0.24 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 2.30 mm jacket thickness\u003c\/li\u003e \u003cli\u003e18.1 mm outer diameter for planning glands, rings, and crossover protection\u003c\/li\u003e \u003cli\u003eRated 600 V with a 105 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC1x80 is suited to single-pole feeder runs, cam-style connector assemblies, portable power distribution, fixed installation feeders, and event or industrial environments where a flexible single-core power cable is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC1x80 with properly rated connectors, cable glands, rubber rings, color-coded jacket systems, and cable crossover protection sized for a 18.1 mm outer diameter and the required current load.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC1x80\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC1x80 a single-core feeder cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a single-core IV power cable with a 80 mm² copper cross-section for feeder and single-pole cable assembly work.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before choosing this cable size?\u003c\/h3\u003e  \u003cp\u003e Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy use the 80 mm² version?\u003c\/h3\u003e  \u003cp\u003e Choose this size when its ampacity, resistance, and 18.1 mm outer diameter match the planned power distribution system and termination hardware.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC1x80 Power Cable, Single-Core IV - 80 mm²\",  \"sku\": \"KCWPVC1x80\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC1x80 is a single-core IV power cable for feeder and single-pole cable assemblies.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-core IV power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Single-core IV, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Cross-Section\",      \"value\": \"80 mm²\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"2.30 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"18.1 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"320 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"0.24 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"105 °C\"    }  ],  \"mpn\": \"KCWPVC1X80\",  \"productID\": \"KCWPVC1X80\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC1x80 a single-core feeder cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a single-core IV power cable with a 80 mm² copper cross-section for feeder and single-pole cable assembly work.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before choosing this cable size?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check current requirement, connector rating, outer diameter fit, gland size, local electrical code, and the way the cable will be protected in the run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why use the 80 mm² version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose this size when its ampacity, resistance, and 18.1 mm outer diameter match the planned power distribution system and termination hardware.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ Single-core","offer_id":53907591790891,"sku":"KCWPVC1x80","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC1X80_b.jpg?v=1782111890"},{"product_id":"kcwpvc3x14","title":"KUPO KCWPVC3x14 Power Cable, Multi-Core CSA - 14 mm² x 3 C","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc3x14-kupo-power-cable-multi-core-csa-14-mmsq-℅-3c.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC3x14\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC3x14 Power Cable is a multi-core CSA construction for power distribution jobs that need several conductors protected inside one jacket. Fine-stranded copper keeps the cable workable, while PVC insulation and a durable PVC outer sheath help the cable seat cleanly into glands and stay consistent through repeated handling.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 3-core layout is useful where a compact multi-conductor run is preferred and each conductor still needs the larger 14 mm² cross-section. Multi-core construction keeps related conductors together, which can make drop-box feeds, distribution runs, and fixed routes cleaner than building the same path from separate single-core lines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e14 mm² x 3 C multi-core CSA construction\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 63 A with maximum resistance of 1.43 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.20 mm jacket thickness\u003c\/li\u003e \u003cli\u003e20.0 mm outer diameter for routing and gland planning\u003c\/li\u003e \u003cli\u003eRated 600 V with a 60 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC3x14 is suited to distribution feeders, drop boxes, fixed runs, temporary venue builds, and industrial or event cable systems where a jacketed, color-coded multi-conductor power cable is preferred.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC3x14 with properly rated distribution equipment, connectors, cable glands, strain relief, and protection sized for a 20.0 mm outer diameter and a 14 mm² x 3 C conductor layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC3x14\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC3x14 a multi-core cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a multi-core CSA cable with a 14 mm² x 3 C conductor layout.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen would I choose multi-core instead of single-core?\u003c\/h3\u003e  \u003cp\u003e Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does the 20.0 mm outer diameter affect?\u003c\/h3\u003e  \u003cp\u003eIt affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC3x14 Power Cable, Multi-Core CSA - 14 mm² x 3 C\",  \"sku\": \"KCWPVC3x14\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC3x14 is a multi-core CSA power cable for distribution feeders and fixed runs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core CSA power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Multi-core CSA, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Size and Core Count\",      \"value\": \"14 mm² x 3 C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.20 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.0 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"63 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"1.43 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"60 °C\"    }  ],  \"mpn\": \"KCWPVC3X14\",  \"productID\": \"KCWPVC3X14\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC3x14 a multi-core cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a multi-core CSA cable with a 14 mm² x 3 C conductor layout.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When would I choose multi-core instead of single-core?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What does the 20.0 mm outer diameter affect?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 3\/4\/5-core","offer_id":53907591856427,"sku":"KCWPVC3x14","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC3X14_b.jpg?v=1782111891"},{"product_id":"kcwpvc3x5-5","title":"KUPO KCWPVC3x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 3 C","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc3x5-5-kupo-power-cable-multi-core-csa-5-5-mmsq-℅-3c.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC3x5.5\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC3x5.5 Power Cable is a multi-core CSA construction for power distribution jobs that need several conductors protected inside one jacket. Fine-stranded copper keeps the cable workable, while PVC insulation and a durable PVC outer sheath help the cable seat cleanly into glands and stay consistent through repeated handling.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 3-core 5.5 mm² version gives a smaller multi-core option for lighter distribution runs and compact routing. Multi-core construction keeps related conductors together, which can make drop-box feeds, distribution runs, and fixed routes cleaner than building the same path from separate single-core lines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e5.5 mm² x 3 C multi-core CSA construction\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 32 A with maximum resistance of 6.10 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.00 mm jacket thickness\u003c\/li\u003e \u003cli\u003e14.2 mm outer diameter for routing and gland planning\u003c\/li\u003e \u003cli\u003eRated 600 V with a 60 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC3x5.5 is suited to distribution feeders, drop boxes, fixed runs, temporary venue builds, and industrial or event cable systems where a jacketed, color-coded multi-conductor power cable is preferred.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC3x5.5 with properly rated distribution equipment, connectors, cable glands, strain relief, and protection sized for a 14.2 mm outer diameter and a 5.5 mm² x 3 C conductor layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC3x5.5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC3x5.5 a multi-core cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a multi-core CSA cable with a 5.5 mm² x 3 C conductor layout.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen would I choose multi-core instead of single-core?\u003c\/h3\u003e  \u003cp\u003e Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does the 14.2 mm outer diameter affect?\u003c\/h3\u003e  \u003cp\u003eIt affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC3x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 3 C\",  \"sku\": \"KCWPVC3x5.5\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC3x5.5 is a multi-core CSA power cable for distribution feeders and fixed runs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core CSA power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Multi-core CSA, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Size and Core Count\",      \"value\": \"5.5 mm² x 3 C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.00 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"14.2 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"32 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"6.10 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"60 °C\"    }  ],  \"mpn\": \"KCWPVC3X5.5\",  \"productID\": \"KCWPVC3X5.5\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC3x5.5 a multi-core cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a multi-core CSA cable with a 5.5 mm² x 3 C conductor layout.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When would I choose multi-core instead of single-core?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What does the 14.2 mm outer diameter affect?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 3\/4\/5-core","offer_id":53907591921963,"sku":"KCWPVC3x5.5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC3X5.5_b.jpg?v=1782111892"},{"product_id":"kcwpvc4x14","title":"KUPO KCWPVC4x14 Power Cable, Multi-Core CSA - 14 mm² x 4 C","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc4x14-kupo-power-cable-multi-core-csa-14-mmsq-℅-4c.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC4x14\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC4x14 Power Cable is a multi-core CSA construction for power distribution jobs that need several conductors protected inside one jacket. Fine-stranded copper keeps the cable workable, while PVC insulation and a durable PVC outer sheath help the cable seat cleanly into glands and stay consistent through repeated handling.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 4-core 14 mm² layout adds another conductor while keeping the heavier conductor size for distribution runs that need more complete wiring in one jacket. Multi-core construction keeps related conductors together, which can make drop-box feeds, distribution runs, and fixed routes cleaner than building the same path from separate single-core lines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e14 mm² x 4 C multi-core CSA construction\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 63 A with maximum resistance of 1.43 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.20 mm jacket thickness\u003c\/li\u003e \u003cli\u003e22.0 mm outer diameter for routing and gland planning\u003c\/li\u003e \u003cli\u003eRated 600 V with a 60 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC4x14 is suited to distribution feeders, drop boxes, fixed runs, temporary venue builds, and industrial or event cable systems where a jacketed, color-coded multi-conductor power cable is preferred.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC4x14 with properly rated distribution equipment, connectors, cable glands, strain relief, and protection sized for a 22.0 mm outer diameter and a 14 mm² x 4 C conductor layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC4x14\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC4x14 a multi-core cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a multi-core CSA cable with a 14 mm² x 4 C conductor layout.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen would I choose multi-core instead of single-core?\u003c\/h3\u003e  \u003cp\u003e Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does the 22.0 mm outer diameter affect?\u003c\/h3\u003e  \u003cp\u003eIt affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC4x14 Power Cable, Multi-Core CSA - 14 mm² x 4 C\",  \"sku\": \"KCWPVC4x14\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC4x14 is a multi-core CSA power cable for distribution feeders and fixed runs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core CSA power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Multi-core CSA, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Size and Core Count\",      \"value\": \"14 mm² x 4 C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.20 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"22.0 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"63 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"1.43 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"60 °C\"    }  ],  \"mpn\": \"KCWPVC4X14\",  \"productID\": \"KCWPVC4X14\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC4x14 a multi-core cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a multi-core CSA cable with a 14 mm² x 4 C conductor layout.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When would I choose multi-core instead of single-core?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What does the 22.0 mm outer diameter affect?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 3\/4\/5-core","offer_id":53907591954731,"sku":"KCWPVC4x14","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC4X14_b.jpg?v=1782111892"},{"product_id":"kcwpvc4x5-5","title":"KUPO KCWPVC4x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 4 C","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc4x5-5-kupo-power-cable-multi-core-csa-5-5-mmsq-℅-4c.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC4x5.5\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC4x5.5 Power Cable is a multi-core CSA construction for power distribution jobs that need several conductors protected inside one jacket. Fine-stranded copper keeps the cable workable, while PVC insulation and a durable PVC outer sheath help the cable seat cleanly into glands and stay consistent through repeated handling.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 4-core 5.5 mm² version is a practical smaller-gauge choice when routing space is limited but four conductors still need to travel together. Multi-core construction keeps related conductors together, which can make drop-box feeds, distribution runs, and fixed routes cleaner than building the same path from separate single-core lines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e5.5 mm² x 4 C multi-core CSA construction\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 32 A with maximum resistance of 6.10 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.00 mm jacket thickness\u003c\/li\u003e \u003cli\u003e15.6 mm outer diameter for routing and gland planning\u003c\/li\u003e \u003cli\u003eRated 600 V with a 60 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC4x5.5 is suited to distribution feeders, drop boxes, fixed runs, temporary venue builds, and industrial or event cable systems where a jacketed, color-coded multi-conductor power cable is preferred.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC4x5.5 with properly rated distribution equipment, connectors, cable glands, strain relief, and protection sized for a 15.6 mm outer diameter and a 5.5 mm² x 4 C conductor layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC4x5.5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC4x5.5 a multi-core cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a multi-core CSA cable with a 5.5 mm² x 4 C conductor layout.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen would I choose multi-core instead of single-core?\u003c\/h3\u003e  \u003cp\u003e Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does the 15.6 mm outer diameter affect?\u003c\/h3\u003e  \u003cp\u003eIt affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC4x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 4 C\",  \"sku\": \"KCWPVC4x5.5\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC4x5.5 is a multi-core CSA power cable for distribution feeders and fixed runs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core CSA power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Multi-core CSA, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Size and Core Count\",      \"value\": \"5.5 mm² x 4 C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.00 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"15.6 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"32 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"6.10 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"60 °C\"    }  ],  \"mpn\": \"KCWPVC4X5.5\",  \"productID\": \"KCWPVC4X5.5\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC4x5.5 a multi-core cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a multi-core CSA cable with a 5.5 mm² x 4 C conductor layout.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When would I choose multi-core instead of single-core?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What does the 15.6 mm outer diameter affect?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 3\/4\/5-core","offer_id":53907592249643,"sku":"KCWPVC4x5.5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC4X5.5_b.jpg?v=1782111893"},{"product_id":"kcwpvc5x5-5","title":"KUPO KCWPVC5x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 5 C","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\kcwpvc5x5-5-kupo-power-cable-multi-core-csa-5-5-mmsq-℅-5c.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KCWPVC5x5.5\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KCWPVC5x5.5 Power Cable is a multi-core CSA construction for power distribution jobs that need several conductors protected inside one jacket. Fine-stranded copper keeps the cable workable, while PVC insulation and a durable PVC outer sheath help the cable seat cleanly into glands and stay consistent through repeated handling.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 5-core 5.5 mm² version gives the most conductor count in this smaller CSA group, useful when one jacket must carry a fuller distribution set. Multi-core construction keeps related conductors together, which can make drop-box feeds, distribution runs, and fixed routes cleaner than building the same path from separate single-core lines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e5.5 mm² x 5 C multi-core CSA construction\u003c\/li\u003e \u003cli\u003eApproximate ampacity of 32 A with maximum resistance of 6.10 Ohm\/km at 20 °C\u003c\/li\u003e \u003cli\u003ePVC insulation and PVC outer sheath with 1.00 mm jacket thickness\u003c\/li\u003e \u003cli\u003e16.5 mm outer diameter for routing and gland planning\u003c\/li\u003e \u003cli\u003eRated 600 V with a 60 °C temperature rating\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKCWPVC5x5.5 is suited to distribution feeders, drop boxes, fixed runs, temporary venue builds, and industrial or event cable systems where a jacketed, color-coded multi-conductor power cable is preferred.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KCWPVC5x5.5 with properly rated distribution equipment, connectors, cable glands, strain relief, and protection sized for a 16.5 mm outer diameter and a 5.5 mm² x 5 C conductor layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KCWPVC5x5.5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KCWPVC5x5.5 a multi-core cable?\u003c\/h3\u003e  \u003cp\u003eYes. It is a multi-core CSA cable with a 5.5 mm² x 5 C conductor layout.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhen would I choose multi-core instead of single-core?\u003c\/h3\u003e  \u003cp\u003e Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does the 16.5 mm outer diameter affect?\u003c\/h3\u003e  \u003cp\u003eIt affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KCWPVC5x5.5 Power Cable, Multi-Core CSA - 5.5 mm² x 5 C\",  \"sku\": \"KCWPVC5x5.5\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"The KUPO KCWPVC5x5.5 is a multi-core CSA power cable for distribution feeders and fixed runs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core CSA power cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Voltage Rating\",      \"value\": \"600 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"Multi-core CSA, PVC insulation\/sheath\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Size and Core Count\",      \"value\": \"5.5 mm² x 5 C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Jacket Thickness\",      \"value\": \"1.00 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"16.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Approximate Ampacity\",      \"value\": \"32 A\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance at 20 °C\",      \"value\": \"6.10 Ohm\/km\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Temperature Rating\",      \"value\": \"60 °C\"    }  ],  \"mpn\": \"KCWPVC5X5.5\",  \"productID\": \"KCWPVC5X5.5\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KCWPVC5x5.5 a multi-core cable?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is a multi-core CSA cable with a 5.5 mm² x 5 C conductor layout.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"When would I choose multi-core instead of single-core?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Choose multi-core when related conductors need to travel together in one jacket, such as distribution feeders, drop boxes, or fixed cable routes.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What does the 16.5 mm outer diameter affect?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It affects gland selection, routing space, bend planning, and which cable protection or crossover product will fit the run.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 3\/4\/5-core","offer_id":53907592315179,"sku":"KCWPVC5x5.5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KCWPVC5X5.5_b.jpg?v=1782111894"},{"product_id":"khpc18x2-5","title":"KUPO KHPC18x2.5 Multi-Core 18 Cable - 18 x 2.5 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\khpc18x2-5-kupo-multi-core-18-cable-pvc.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KHPC18x2.5\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO KHPC18x2.5 Multi-Core 18 Cable is the bulk-cable member of the KUPO 18-core power family, built for portable entertainment rigs that distribute six circuits through one manageable run. Class 5 fine-stranded copper keeps the cable flexible, while the self-extinguishing PVC outer jacket helps protect the cable through repeated load-in and load-out cycles.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003e For stage and event power, one well-built 18-core cable can be cleaner than managing a bundle of separate lines. KHPC18x2.5 gives technicians a raw cable option for custom assemblies, service replacement, or shop-built runs that need to match the EXE18 extension and TF18 break-out family.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e18 x 2.5 mm² construction, approximately 14 AWG\u003c\/li\u003e \u003cli\u003eStranded class 5 copper conductors, 48 strands x 0.25 mm copper\u003c\/li\u003e \u003cli\u003ePVC insulation with self-extinguishing, flame-retardant PVC outer jacket\u003c\/li\u003e \u003cli\u003eRated 300\/500 V with 2000 V test voltage for 5 minutes to IEC 60227\u003c\/li\u003e \u003cli\u003e20.4 mm ±0.5 mm outer diameter with -15 to 70 °C working temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eKHPC18x2.5 is suited to bulk multicore cable builds, six-circuit entertainment power distribution, indoor touring rigs, shop-built cable assemblies, replacement cable stock, and systems that pair with EXE18 and TF18 family assemblies.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse KHPC18x2.5 where an 18 x 2.5 mm² multicore cable is required. Sister assemblies include EXE18\/2.5 extensions with PLS-5219LM to PLS-5219LF terminations and TF18\/2.5 fan-out assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KHPC18x2.5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs KHPC18x2.5 a terminated cable assembly?\u003c\/h3\u003e  \u003cp\u003eNo. It is the bulk-cable model in the 18-core family, intended for custom builds, service work, or shop assembly.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow many circuits is this cable family intended to support?\u003c\/h3\u003e  \u003cp\u003eThe specification describes the 18-core construction as supporting six circuits of power over one manageable cable run.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhich sister products use this cable family?\u003c\/h3\u003e  \u003cp\u003eRelated products include EXE18\/2.5 extension assemblies and TF18\/2.5 fan-out or break-out assemblies.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO KHPC18x2.5 Multi-Core 18 Cable - 18 x 2.5 mm²\",  \"sku\": \"KHPC18x2.5\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO KHPC18x2.5 is a bulk 18 x 2.5 mm² multi-core cable with class 5 copper conductors, PVC insulation, self-extinguishing PVC jacket, and 300\/500 V rating.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Multi-core 18 cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cross-Section\",      \"value\": \"18 x 2.5 mm², approximately 14 AWG\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor Stranding\",      \"value\": \"48 strands x 0.25 mm copper\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation\",      \"value\": \"PVC\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Test Voltage\",      \"value\": \"2000 V for 5 minutes to IEC 60227\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Bend Radius Portable Use\",      \"value\": \"12 x OD\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Bend Radius Fixed Installation\",      \"value\": \"8 x OD\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 to 70 °C\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Outer Diameter\",      \"value\": \"20.4 mm +\/- 0.5 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Resistance\",      \"value\": \"7.98 Ohm\/km at 20 °C\"    }  ],  \"mpn\": \"KHPC18X2.5\",  \"productID\": \"KHPC18X2.5\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is KHPC18x2.5 a terminated cable assembly?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"No. It is the bulk-cable model in the 18-core family, intended for custom builds, service work, or shop assembly.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"How many circuits is this cable family intended to support?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The specification describes the 18-core construction as supporting six circuits of power over one manageable cable run.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Which sister products use this cable family?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Related products include EXE18\/2.5 extension assemblies and TF18\/2.5 fan-out or break-out assemblies.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Bare Power Cable \/ 18-core","offer_id":53907592872235,"sku":"KHPC18x2.5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KHPC18X2.5_b.jpg?v=1782111901"},{"product_id":"tf18-1-5-1","title":"KUPO TF18\/1.5-1 19-Pin Two-Fer Cable - 1 mm, 1.5 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\tf18_1.5-1-19-pin-two-fer-cable-1m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"TF18\/1.5-1\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO TF18\/1.5-1 is a 19-pin multicore two-fer assembly that takes one PLS-5219LM 19-pin input and fans it out to two PLS-5219LF outputs. Built for portable entertainment rigs, it lets one six-circuit feed serve two lighting bars or adjacent rigging positions without building an improvised split on site.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 1 mm length is useful when the split point sits close to the two receiving bars or positions and extra slack would only add dressing work. The multicore cable uses stranded class 5 copper conductors with PVC insulation and a self-extinguishing flame-retardant jacket, so the split remains manageable through load-in, load-out, and repeated handling.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e18 C x 1.5 mm² multicore two-fer assembly\u003c\/li\u003e \u003cli\u003e1 mm length with 1 x PLS-5219LM input and 2 x PLS-5219LF outputs\u003c\/li\u003e \u003cli\u003eSplits one 19-pin input into two 19-pin outputs for parallel circuit distribution\u003c\/li\u003e \u003cli\u003ePVC insulation and self-extinguishing flame-retardant outer jacket\u003c\/li\u003e \u003cli\u003eRated 300\/500 V with -15 to 70 °C working temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eTF18\/1.5-1 is suited to sharing a six-circuit feed between two lighting bars, adjacent truss positions, stage multicore layouts, rental packages, and touring systems using Socapex-style 19-pin connectors.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse TF18\/1.5-1 with compatible PLS-5219 \/ Socapex 419 \/ Veam VSC style 19-pin systems and circuit plans that allow one input to feed two outputs safely within system limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"TF18\/1.5-1\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does TF18\/1.5-1 split?\u003c\/h3\u003e  \u003cp\u003eIt splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eThe assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this 1.5 mm² version typically chosen?\u003c\/h3\u003e  \u003cp\u003eThe 1.5 mm² version is the lighter-duty option for compatible six-circuit systems.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO TF18\/1.5-1 19-Pin Two-Fer Cable - 1 mm, 1.5 mm²\",  \"sku\": \"TF18\/1.5-1\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO TF18\/1.5-1 is a 1 m 19-pin two-fer \/ break-out cable with 18 C x 1.5 mm² multicore cable, PLS-5219LM input, and two PLS-5219LF outputs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"19-pin two-fer \/ break-out cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"1 x PLS-5219LM input, 2 x PLS-5219LF outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18 C x 1.5 mm² multicore cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Function\",      \"value\": \"Two-fer, Y-split, 1 input to 2 outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 to 70 °C\"    }  ],  \"mpn\": \"TF18-1.5-1\",  \"productID\": \"TF18-1.5-1\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What does TF18\/1.5-1 split?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"How is this 1.5 mm² version typically chosen?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 1.5 mm² version is the lighter-duty option for compatible six-circuit systems.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Twofer","offer_id":53907623149867,"sku":"TF18-1.5-1","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/TF18-1.5-1_b.jpg?v=1782112294"},{"product_id":"tf18-1-5-2","title":"KUPO TF18\/1.5-2 19-Pin Two-Fer Cable - 2 mm, 1.5 mm²","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\tf18_1.5-2-19-pin-two-fer-cable-2m-1-5mmsq.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"TF18\/1.5-2\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO TF18\/1.5-2 is a 19-pin multicore two-fer assembly that takes one PLS-5219LM 19-pin input and fans it out to two PLS-5219LF outputs. Built for portable entertainment rigs, it lets one six-circuit feed serve two lighting bars or adjacent rigging positions without building an improvised split on site.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 2 mm length gives crews more reach when the two receiving positions are separated or when the split needs to route around hardware. The multicore cable uses stranded class 5 copper conductors with PVC insulation and a self-extinguishing flame-retardant jacket, so the split remains manageable through load-in, load-out, and repeated handling.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e18 C x 1.5 mm² multicore two-fer assembly\u003c\/li\u003e \u003cli\u003e2 mm length with 1 x PLS-5219LM input and 2 x PLS-5219LF outputs\u003c\/li\u003e \u003cli\u003eSplits one 19-pin input into two 19-pin outputs for parallel circuit distribution\u003c\/li\u003e \u003cli\u003ePVC insulation and self-extinguishing flame-retardant outer jacket\u003c\/li\u003e \u003cli\u003eRated 300\/500 V with -15 to 70 °C working temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eTF18\/1.5-2 is suited to sharing a six-circuit feed between two lighting bars, adjacent truss positions, stage multicore layouts, rental packages, and touring systems using Socapex-style 19-pin connectors.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse TF18\/1.5-2 with compatible PLS-5219 \/ Socapex 419 \/ Veam VSC style 19-pin systems and circuit plans that allow one input to feed two outputs safely within system limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"TF18\/1.5-2\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does TF18\/1.5-2 split?\u003c\/h3\u003e  \u003cp\u003eIt splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eThe assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this 1.5 mm² version typically chosen?\u003c\/h3\u003e  \u003cp\u003eThe 1.5 mm² version is the lighter-duty option for compatible six-circuit systems.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO TF18\/1.5-2 19-Pin Two-Fer Cable - 2 mm, 1.5 mm²\",  \"sku\": \"TF18\/1.5-2\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO TF18\/1.5-2 is a 2 m 19-pin two-fer \/ break-out cable with 18 C x 1.5 mm² multicore cable, PLS-5219LM input, and two PLS-5219LF outputs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"19-pin two-fer \/ break-out cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"1 x PLS-5219LM input, 2 x PLS-5219LF outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18 C x 1.5 mm² multicore cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"2 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Function\",      \"value\": \"Two-fer, Y-split, 1 input to 2 outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 to 70 °C\"    }  ],  \"mpn\": \"TF18-1.5-2\",  \"productID\": \"TF18-1.5-2\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What does TF18\/1.5-2 split?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"How is this 1.5 mm² version typically chosen?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 1.5 mm² version is the lighter-duty option for compatible six-circuit systems.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Twofer","offer_id":53907623182635,"sku":"TF18-1.5-2","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/TF18-1.5-2_b.jpg?v=1782112294"},{"product_id":"tf18-2-5-1","title":"KUPO TF18\/2.5-1 18-Core Multi-Cable Break-Out Assembly - 1 mm","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\tf18-2-5-1-multi-cable-break-out-1m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"TF18\/2.5-1\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO TF18\/2.5-1 is a 19-pin multicore two-fer assembly that takes one PLS-5219LM 19-pin input and fans it out to two PLS-5219LF outputs. Built for portable entertainment rigs, it lets one six-circuit feed serve two lighting bars or adjacent rigging positions without building an improvised split on site.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 1 mm 2.5 mm² version keeps the heavier break-out compact when the two output positions are close to the input. The multicore cable uses stranded class 5 copper conductors with PVC insulation and a self-extinguishing flame-retardant jacket, so the split remains manageable through load-in, load-out, and repeated handling.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e18 C x 2.5 mm² multicore two-fer assembly\u003c\/li\u003e \u003cli\u003e1 mm length with 1 x PLS-5219LM input and 2 x PLS-5219LF outputs\u003c\/li\u003e \u003cli\u003eSplits one 19-pin input into two 19-pin outputs for parallel circuit distribution\u003c\/li\u003e \u003cli\u003ePVC insulation and self-extinguishing flame-retardant outer jacket\u003c\/li\u003e \u003cli\u003eRated 300\/500 V with -15 to 70 °C working temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eTF18\/2.5-1 is suited to sharing a six-circuit feed between two lighting bars, adjacent truss positions, stage multicore layouts, rental packages, and touring systems using Socapex-style 19-pin connectors.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse TF18\/2.5-1 with compatible PLS-5219 \/ Socapex 419 \/ Veam VSC style 19-pin systems and circuit plans that allow one input to feed two outputs safely within system limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"TF18\/2.5-1\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does TF18\/2.5-1 split?\u003c\/h3\u003e  \u003cp\u003eIt splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eThe assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this 2.5 mm² version typically chosen?\u003c\/h3\u003e  \u003cp\u003eThe 2.5 mm² version is built on the KHPC18x2.5 base cable for heavier six-circuit multicore use.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO TF18\/2.5-1 18-Core Multi-Cable Break-Out Assembly - 1 mm\",  \"sku\": \"TF18\/2.5-1\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO TF18\/2.5-1 is a 1 m 19-pin two-fer \/ break-out cable with 18 C x 2.5 mm² multicore cable, PLS-5219LM input, and two PLS-5219LF outputs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"19-pin two-fer \/ break-out cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"1 x PLS-5219LM input, 2 x PLS-5219LF outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18 C x 2.5 mm² multicore cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Function\",      \"value\": \"Two-fer, Y-split, 1 input to 2 outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 to 70 °C\"    }  ],  \"mpn\": \"TF18-2.5-1\",  \"productID\": \"TF18-2.5-1\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What does TF18\/2.5-1 split?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"How is this 2.5 mm² version typically chosen?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 2.5 mm² version is built on the KHPC18x2.5 base cable for heavier six-circuit multicore use.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Twofer","offer_id":53907623248171,"sku":"TF18-2.5-1","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/TF18-2.5-1_b.jpg?v=1782112294"},{"product_id":"tf18-2-5-2","title":"KUPO TF18\/2.5-2 18-Core Multi-Cable Break-Out Assembly - 2 mm","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\tf18-2-5-2-multi-cable-break-out-2m.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"TF18\/2.5-2\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO TF18\/2.5-2 is a 19-pin multicore two-fer assembly that takes one PLS-5219LM 19-pin input and fans it out to two PLS-5219LF outputs. Built for portable entertainment rigs, it lets one six-circuit feed serve two lighting bars or adjacent rigging positions without building an improvised split on site.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 2 mm 2.5 mm² version gives additional placement flexibility while staying in the heavier KHPC18x2.5 cable family. The multicore cable uses stranded class 5 copper conductors with PVC insulation and a self-extinguishing flame-retardant jacket, so the split remains manageable through load-in, load-out, and repeated handling.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e18 C x 2.5 mm² multicore two-fer assembly\u003c\/li\u003e \u003cli\u003e2 mm length with 1 x PLS-5219LM input and 2 x PLS-5219LF outputs\u003c\/li\u003e \u003cli\u003eSplits one 19-pin input into two 19-pin outputs for parallel circuit distribution\u003c\/li\u003e \u003cli\u003ePVC insulation and self-extinguishing flame-retardant outer jacket\u003c\/li\u003e \u003cli\u003eRated 300\/500 V with -15 to 70 °C working temperature\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eTF18\/2.5-2 is suited to sharing a six-circuit feed between two lighting bars, adjacent truss positions, stage multicore layouts, rental packages, and touring systems using Socapex-style 19-pin connectors.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse TF18\/2.5-2 with compatible PLS-5219 \/ Socapex 419 \/ Veam VSC style 19-pin systems and circuit plans that allow one input to feed two outputs safely within system limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"TF18\/2.5-2\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat does TF18\/2.5-2 split?\u003c\/h3\u003e  \u003cp\u003eIt splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connectors are fitted?\u003c\/h3\u003e  \u003cp\u003eThe assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eHow is this 2.5 mm² version typically chosen?\u003c\/h3\u003e  \u003cp\u003eThe 2.5 mm² version is built on the KHPC18x2.5 base cable for heavier six-circuit multicore use.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO TF18\/2.5-2 18-Core Multi-Cable Break-Out Assembly - 2 mm\",  \"sku\": \"TF18\/2.5-2\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO TF18\/2.5-2 is a 2 m 19-pin two-fer \/ break-out cable with 18 C x 2.5 mm² multicore cable, PLS-5219LM input, and two PLS-5219LF outputs.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"19-pin two-fer \/ break-out cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"1 x PLS-5219LM input, 2 x PLS-5219LF outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"18 C x 2.5 mm² multicore cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Conductor\",      \"value\": \"Stranded copper class 5 of IEC 60228\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"2 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Function\",      \"value\": \"Two-fer, Y-split, 1 input to 2 outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Insulation \/ Jacket\",      \"value\": \"PVC, self-extinguishing, flame-retardant\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Rated Voltage\",      \"value\": \"300\/500 V\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Compliance\",      \"value\": \"IEC 60502-1, IEC 60228, IEC 60332-3-24, RoHS\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Temperature\",      \"value\": \"-15 to 70 °C\"    }  ],  \"mpn\": \"TF18-2.5-2\",  \"productID\": \"TF18-2.5-2\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What does TF18\/2.5-2 split?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"It splits one 19-pin input into two 19-pin outputs for parallel circuit distribution.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connectors are fitted?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The assembly uses one PLS-5219LM input and two PLS-5219LF outputs.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"How is this 2.5 mm² version typically chosen?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"The 2.5 mm² version is built on the KHPC18x2.5 base cable for heavier six-circuit multicore use.\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ 19-pin Cable Assembly \/ Twofer","offer_id":53907623379243,"sku":"TF18-2.5-2","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/TF18-2.5-2_b.jpg?v=1782112296"},{"product_id":"ys-16331-cee","title":"YS-16331-CEE - 3-Phase Y Splitter","description":"\u003c!-- Sub-type: P-S (Supplemental from simple source) --\u003e\u003c!-- Source: power_missing_markdown_batch_01\/ys-16331-cee-3-phase-y-splitter.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-16331-CEE\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eKupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eSplitter hardware must match the phase, connector, and site power arrangement. YS-16331-CEE gives crews a defined Y-splitter option for distributing power without improvising the connection in the field.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter to three single phase, length 100 cm, parallel wired with 16 A CEE connectors\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003e Clear phase identification for each outlet cable\u003c\/li\u003e  \u003cli\u003eOverall length 100 cm (without connector)\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter to three single phase, length 100 cm, parallel wired with 16 A CEE connectors\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003e Clear phase identification for each outlet cable\u003c\/li\u003e  \u003cli\u003eOverall length 100 cm (without connector)\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it as part of a professional power, data, or set-support kit where the listed connector, accessory, or hardware function is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-16331-CEE with 16 A CEE connector systems where a three-phase source is split into three single-phase outlet cables. Check the 5 x 2.5 mm² H07RN-F input, 3 x 2.5 mm² H07RN-F outputs, phase labeling, and 100 cm cable length fit the planned stage or venue distribution layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"YS-16331-CEE | 3-Phase Y Splitter\",  \"description\": \"Kupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.kupopower.com\"  },  \"category\": \"Power Solution \u003e Power \u0026 Data Distro\",  \"sku\": \"YS-16331-CEE\",  \"mpn\": \"YS-16331-CEE\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Y-splitter cable assembly\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m without connector\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Split Configuration\",      \"value\": \"3-phase to 3 single-phase outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Identification\",      \"value\": \"Phase ID + parallel \/ series label\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel wired\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Input Cable\",      \"value\": \"5 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector format\",      \"value\": \"16 A CEE connectors\"    }  ],  \"productID\": \"YS-16331-CEE\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-16331-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is YS-16331-CEE used for?\u003c\/h3\u003e  \u003cp\u003eYS-16331-CEE is used for the power, data, cable-management, or set-support function described in the specifications.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e  \u003cp\u003e Check the listed connector type, size, rating, or accessory function against the equipment it will be used with.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this part intended for professional production use?\u003c\/h3\u003e  \u003cp\u003eYes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What is YS-16331-CEE used for?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-16331-CEE is used for the power, data, cable-management, or set-support function described in the specifications.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before ordering?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check the listed connector type, size, rating, or accessory function against the equipment it will be used with.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is this part intended for professional production use?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\"   }  } ]}\u003c\/script\u003e\u003c!-- Download block omitted for YS-16331-CEE --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 3-Phase","offer_id":53907625312555,"sku":"YS-16331-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-16331-CEE_b.jpg?v=1782112319"},{"product_id":"ys-16331","title":"YS-16331 - 3-Phase Y Splitter","description":"\u003c!-- Sub-type: P-S (Supplemental from simple source) --\u003e\u003c!-- Source: power_missing_markdown_batch_01\/ys-16331-3-phase-y-splitter.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-16331\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eKupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly. This non-CEE version is supplied with unterminated wire leads and no connector.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eSplitter hardware must match the phase, wiring, and site power arrangement. YS-16331 gives crews a defined hard-wired Y-splitter option for distributing power without improvising the connection in the field.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-Phase Y Splitter, fan-out to three single phase, length 1 m\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eEnd format: unterminated wire leads, no connector supplied\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-Phase Y Splitter, fan-out to three single phase, length 1 m\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eEnd format: unterminated wire leads, no connector supplied\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it as part of a professional temporary power system where a hard-wired Y-splitter with clearly identified phase leads is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-16331 with three-phase feeds that need to fan out into three single-phase circuits using 5 x 2.5 mm² H07RN-F input cable and 3 x 2.5 mm² H07RN-F output cable. Check phase identification, wiring mode, upstream protection, and the current draw of each single-phase branch before connecting equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"YS-16331 | 3-Phase Y Splitter\",  \"description\": \"Kupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly. This non-CEE version is supplied with unterminated wire leads and no connector.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.kupopower.com\"  },  \"category\": \"Power Solution \u003e Power \u0026 Data Distro\",  \"sku\": \"YS-16331\",  \"mpn\": \"YS-16331\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Y-splitter cable assembly\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Split Configuration\",      \"value\": \"3-phase to 3 single-phase outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Identification\",      \"value\": \"Parallel \/ series label sleeve\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel \/ series identification\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Input Cable\",      \"value\": \"5 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"End Format\",      \"value\": \"Unterminated leads, no connector\"    }  ],  \"productID\": \"YS-16331\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-16331\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is YS-16331 used for?\u003c\/h3\u003e  \u003cp\u003eYS-16331 is used as a hard-wired three-phase Y-splitter where one feed needs to fan out into three single-phase branches.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e  \u003cp\u003e Check the wiring mode, phase identification, H07RN-F cable sizes, upstream protection, branch load, and required field termination method before installation.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this part intended for professional production use?\u003c\/h3\u003e  \u003cp\u003eYes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What is YS-16331 used for?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-16331 is used as a hard-wired three-phase Y-splitter where one feed needs to fan out into three single-phase branches.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before ordering?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check the wiring mode, phase identification, H07RN-F cable sizes, upstream protection, branch load, and required field termination method before installation.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is this part intended for professional production use?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\"   }  } ]}\u003c\/script\u003e\u003c!-- Download block omitted for YS-16331 --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 3-Phase","offer_id":53907625378091,"sku":"YS-16331","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-16331_b.jpg?v=1782112320"},{"product_id":"ys-2-5-cee","title":"KUPO YS-2.5-CEE Single Phase Y-Splitter - 3 x 2.5 mm² Parallel, CEE","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-2.5-cee-single-phase-y-splitter-2-5mmsq-parallel-cee.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-2.5-CEE\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-2.5-CEE Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe parallel CEE version keeps voltage consistent across the two outputs, making it the more familiar twofer behavior for compatible CEE lighting loads. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 2.5 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eParallel wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003e16 A CEE form line female output connectors\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-2.5-CEE is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-2.5-CEE only with lighting instruments, connectors, dimmer channels, and load plans appropriate for parallel wiring and 3 x 2.5 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-2.5-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-2.5-CEE parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-2.5-CEE is parallel wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003e16 A CEE form line female output connectors\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-2.5-CEE Single Phase Y-Splitter - 3 x 2.5 mm² Parallel, CEE\",  \"sku\": \"YS-2.5-CEE\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-2.5-CEE is a 1 m single-phase Y-splitter with 3 x 2.5 mm² H07RN-F rubber cable, parallel wiring, and 16 A CEE form line female output connectors.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"16 A CEE form line female output connectors\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-2.5-CEE\",  \"productID\": \"YS-2.5-CEE\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-2.5-CEE parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-2.5-CEE is parallel wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"16 A CEE form line female output connectors\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625410859,"sku":"YS-2.5-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-2.5-CEE_b.jpg?v=1782112321"},{"product_id":"ys-2-5-s-cee","title":"KUPO YS-2.5\/S-CEE Single Phase Y-Splitter - 3 x 2.5 mm² Series, CEE","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-2.5_s-cee-single-phase-y-splitter-2-5mmsq-series-cee.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-2.5\/S-CEE\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-2.5\/S-CEE Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe series CEE version is a specialized splitter, not the everyday parallel twofer, so the wiring mark needs to be read before it goes into a show circuit. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 2.5 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eSeries wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003e16 A CEE form line female output connectors\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-2.5\/S-CEE is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-2.5\/S-CEE only with lighting instruments, connectors, dimmer channels, and load plans appropriate for series wiring and 3 x 2.5 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-2.5\/S-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-2.5\/S-CEE parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-2.5\/S-CEE is series wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003e16 A CEE form line female output connectors\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-2.5\/S-CEE Single Phase Y-Splitter - 3 x 2.5 mm² Series, CEE\",  \"sku\": \"YS-2.5\/S-CEE\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-2.5\/S-CEE is a 1 m single-phase Y-splitter with 3 x 2.5 mm² H07RN-F rubber cable, series wiring, and 16 A CEE form line female output connectors.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"16 A CEE form line female output connectors\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Series\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-2.5-S-CEE\",  \"productID\": \"YS-2.5-S-CEE\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-2.5\/S-CEE parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-2.5\/S-CEE is series wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"16 A CEE form line female output connectors\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625476395,"sku":"YS-2.5-S-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-2.5-S-CEE_b.jpg?v=1782112322"},{"product_id":"ys-2-5-s","title":"KUPO YS-2.5\/S Single Phase Y-Splitter - 3 x 2.5 mm² Series","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-2.5_s-single-phase-y-splitter-2-5mmsq-series.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-2.5\/S\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-2.5\/S Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eIn series wiring, current is the same through each instrument while voltage divides across the instruments, so this version should be chosen deliberately. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 2.5 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eSeries wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003eStage pin connectors\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-2.5\/S is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-2.5\/S only with lighting instruments, connectors, dimmer channels, and load plans appropriate for series wiring and 3 x 2.5 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-2.5\/S\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-2.5\/S parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-2.5\/S is series wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003eStage pin connectors\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-2.5\/S Single Phase Y-Splitter - 3 x 2.5 mm² Series\",  \"sku\": \"YS-2.5\/S\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-2.5\/S is a 1 m single-phase Y-splitter with 3 x 2.5 mm² H07RN-F rubber cable, series wiring, and Stage pin connectors.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"Stage pin connectors\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Series\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-2.5-S\",  \"productID\": \"YS-2.5-S\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-2.5\/S parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-2.5\/S is series wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Stage pin connectors\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625541931,"sku":"YS-2.5-S","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-2.5-S_b.jpg?v=1782112323"},{"product_id":"ys-2-5","title":"KUPO YS-2.5 Single Phase Y-Splitter - 3 x 2.5 mm² Parallel","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-2.5-single-phase-y-splitter-2-5mmsq-parallel.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-2.5\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-2.5 Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThis is the common parallel stage-pin configuration for splitting one dimmer channel to two compatible instruments while keeping voltage consistent. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 2.5 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eParallel wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003eStage pin connectors for dimmer system\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-2.5 is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-2.5 only with lighting instruments, connectors, dimmer channels, and load plans appropriate for parallel wiring and 3 x 2.5 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-2.5\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-2.5 parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-2.5 is parallel wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003eStage pin connectors for dimmer system\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-2.5 Single Phase Y-Splitter - 3 x 2.5 mm² Parallel\",  \"sku\": \"YS-2.5\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-2.5 is a 1 m single-phase Y-splitter with 3 x 2.5 mm² H07RN-F rubber cable, parallel wiring, and Stage pin connectors for dimmer system.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"Stage pin connectors for dimmer system\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-2.5\",  \"productID\": \"YS-2.5\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-2.5 parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-2.5 is parallel wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Stage pin connectors for dimmer system\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625574699,"sku":"YS-2.5","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-2.5_b.jpg?v=1782112324"},{"product_id":"ys-32323-cee","title":"YS-32323-CEE - 3-Phase Y Splitter","description":"\u003c!-- Sub-type: P-S (Supplemental from simple source) --\u003e\u003c!-- Source: power_missing_markdown_batch_01\/ys-32323-cee-3-phase-y-splitter.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-32323-CEE\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eKupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eSplitter hardware must match the phase, connector, and site power arrangement. YS-32323-CEE gives crews a defined Y-splitter option for distributing power without improvising the connection in the field.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter, fan out to two three phase, length 1 m, parallel wired with 32 A CEE form connectors\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003e Clear phase identification for each outlet cable\u003c\/li\u003e  \u003cli\u003eOverall length 100 cm (without connector)\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter, fan out to two three phase, length 1 m, parallel wired with 32 A CEE form connectors\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 3 x 2.5 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003e Clear phase identification for each outlet cable\u003c\/li\u003e  \u003cli\u003eOverall length 100 cm (without connector)\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it as part of a professional power, data, or set-support kit where the listed connector, accessory, or hardware function is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-32323-CEE with 32 A CEE form connector systems where a parallel-wired three-phase splitter is required. Check connector gender, phase labeling, H07RN-F cable size, 100 cm overall length, and the load on each three-phase branch before using it in temporary event or venue power distribution.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"YS-32323-CEE | 3-Phase Y Splitter\",  \"description\": \"Kupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.kupopower.com\"  },  \"category\": \"Power Solution \u003e Power \u0026 Data Distro\",  \"sku\": \"YS-32323-CEE\",  \"mpn\": \"YS-32323-CEE\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Y-splitter cable assembly\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m without connector\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Split Configuration\",      \"value\": \"3-phase to 2 three-phase outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Identification\",      \"value\": \"Phase ID + parallel \/ series label\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel wired\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Input Cable\",      \"value\": \"5 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connector format\",      \"value\": \"32 A CEE form connectors\"    }  ],  \"productID\": \"YS-32323-CEE\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-32323-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is YS-32323-CEE used for?\u003c\/h3\u003e  \u003cp\u003eYS-32323-CEE is used for the power, data, cable-management, or set-support function described in the specifications.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e  \u003cp\u003e Check the listed connector type, size, rating, or accessory function against the equipment it will be used with.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this part intended for professional production use?\u003c\/h3\u003e  \u003cp\u003eYes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What is YS-32323-CEE used for?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-32323-CEE is used for the power, data, cable-management, or set-support function described in the specifications.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before ordering?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check the listed connector type, size, rating, or accessory function against the equipment it will be used with.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is this part intended for professional production use?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\"   }  } ]}\u003c\/script\u003e\u003c!-- Download block omitted for YS-32323-CEE --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 3-Phase","offer_id":53907625640235,"sku":"YS-32323-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-32323-CEE_b.jpg?v=1782112325"},{"product_id":"ys-32323","title":"YS-32323 - 3-Phase Y Splitter","description":"\u003c!-- Sub-type: P-S (Supplemental from simple source) --\u003e\u003c!-- Source: power_missing_markdown_batch_01\/ys-32323-3-phase-y-splitter.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-32323\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eKupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly. This non-CEE version is supplied with unterminated wire leads and no connector.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eSplitter hardware must match the phase, wiring, and site power arrangement. YS-32323 gives crews a defined hard-wired Y-splitter option for distributing power without improvising the connection in the field.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter, fan out to two three phase, length 1 m, parallel wired\u003c\/li\u003e  \u003cli\u003eMax. 32 A (415 V) three phase Y splitter\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 4.0 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 5 x 4.0 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eEnd format: unterminated wire leads, no connector supplied\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003cul\u003e  \u003cli\u003e3-phase Y splitter, fan out to two three phase, length 1 m, parallel wired\u003c\/li\u003e  \u003cli\u003eMax. 32 A (415 V) three phase Y splitter\u003c\/li\u003e  \u003cli\u003eInput cable: 5 x 4.0 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eOutput cable: 5 x 4.0 mm² H07RN-F\u003c\/li\u003e  \u003cli\u003eEnd format: unterminated wire leads, no connector supplied\u003c\/li\u003e  \u003cli\u003eParallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eUse it as part of a professional temporary power system where a hard-wired Y-splitter with clearly identified phase leads is required.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-32323 with three-phase 32 A, 415 V distribution where one three-phase feed must split into two three-phase branches. Check both input and output cable sizing at 5 x 4.0 mm² H07RN-F, phase continuity, upstream breaker capacity, and load balance across both branch circuits before operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"YS-32323 | 3-Phase Y Splitter\",  \"description\": \"Kupo Y-Splitters are constructed by PVC injection-molding core offering great tensile force and rubber molding cover with excellent impactabsorbency. The mold-in extension is HO7RN-F rubber cables overall length 1 m with fire retardant and oil resistant specs; it is the standard extension cable in theatres. PVC is not suitable for extension leads as it melts easily and is not very flexible. Parallel \/ Series sticker mark with transparent heat-shrink sleeve identify the wirings clearly. This non-CEE version is supplied with unterminated wire leads and no connector.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.kupopower.com\"  },  \"category\": \"Power Solution \u003e Power \u0026 Data Distro\",  \"sku\": \"YS-32323\",  \"mpn\": \"YS-32323\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Y-splitter cable assembly\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Split Configuration\",      \"value\": \"3-phase to 2 three-phase outputs\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Identification\",      \"value\": \"Parallel \/ series label sleeve\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel wired\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Input Cable\",      \"value\": \"5 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Output Cable\",      \"value\": \"3 x 2.5 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Maximum Rating\",      \"value\": \"Max. 32 A (415 V)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"End Format\",      \"value\": \"Unterminated leads, no connector\"    }  ],  \"productID\": \"YS-32323\"}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-32323\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat is YS-32323 used for?\u003c\/h3\u003e  \u003cp\u003eYS-32323 is used as a hard-wired three-phase Y-splitter where one three-phase feed needs to split into two three-phase branches.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat should I check before ordering?\u003c\/h3\u003e  \u003cp\u003e Check the wiring mode, phase identification, H07RN-F cable sizes, upstream protection, branch load, and required field termination method before installation.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs this part intended for professional production use?\u003c\/h3\u003e  \u003cp\u003eYes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"What is YS-32323 used for?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-32323 is used as a hard-wired three-phase Y-splitter where one three-phase feed needs to split into two three-phase branches.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What should I check before ordering?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \" Check the wiring mode, phase identification, H07RN-F cable sizes, upstream protection, branch load, and required field termination method before installation.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Is this part intended for professional production use?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Yes. It is part of the KUPO Power Solution range for stage, studio, venue, rental, or production workflows.\"   }  } ]}\u003c\/script\u003e\u003c!-- Download block omitted for YS-32323 --\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 3-Phase","offer_id":53907625673003,"sku":"YS-32323","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-32323_b.jpg?v=1782112325"},{"product_id":"ys-4-0-cee","title":"KUPO YS-4.0-CEE Single Phase Y-Splitter - 3 x 4.0 mm² Parallel, CEE","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-4.0-cee-single-phase-y-splitter-4-0mmsq-parallel-cee.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-4.0-CEE\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-4.0-CEE Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe heavier 4.0 mm² CEE version is for higher-current parallel applications where the cable cross-section and connector format need to match the load plan. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 4.0 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eParallel wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003e32 A CEE form line female output connectors\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-4.0-CEE is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-4.0-CEE only with lighting instruments, connectors, dimmer channels, and load plans appropriate for parallel wiring and 3 x 4.0 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-4.0-CEE\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-4.0-CEE parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-4.0-CEE is parallel wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003e32 A CEE form line female output connectors\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-4.0-CEE Single Phase Y-Splitter - 3 x 4.0 mm² Parallel, CEE\",  \"sku\": \"YS-4.0-CEE\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-4.0-CEE is a 1 m single-phase Y-splitter with 3 x 4.0 mm² H07RN-F rubber cable, parallel wiring, and 32 A CEE form line female output connectors.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"32 A CEE form line female output connectors\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 4.0 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-4.0-CEE\",  \"productID\": \"YS-4.0-CEE\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-4.0-CEE parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-4.0-CEE is parallel wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"32 A CEE form line female output connectors\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625705771,"sku":"YS-4.0-CEE","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-4.0-CEE_b.jpg?v=1782112326"},{"product_id":"ys-4-0","title":"KUPO YS-4.0 Single Phase Y-Splitter - 3 x 4.0 mm² Parallel","description":"\u003c!-- Sub-type: P-D --\u003e\u003c!-- Source: from_catalog\\ys-4.0-single-phase-y-splitter-4-0mmsq-parallel.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0;}.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0;}.product-description,.product-description p,.product-description li { color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"YS-4.0\"\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThe KUPO YS-4.0 Single Phase Y-Splitter is a theatrical stage lighting twofer built to connect two lighting instruments to one dimming channel without forcing multiple conductors into one connector. Its molded construction uses a PVC injection-molding inner core for tensile strength and a rubber outer cover for impact absorbency.\u003c\/p\u003e \u003ch3\u003eWhy It Matters\u003c\/h3\u003e \u003cp\u003eThe 4.0 mm² stage-pin version gives the parallel twofer format a heavier cable cross-section for higher-current stage lighting applications. The transparent heat-shrink sleeve over the Parallel \/ Series sticker keeps the wiring identification visible, which matters because parallel and series twofers behave very differently on a dimmer circuit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e3 x 4.0 mm² H07RN-F rubber cable, 1 mm length\u003c\/li\u003e \u003cli\u003eParallel wiring for theatrical twofer applications\u003c\/li\u003e \u003cli\u003eStage pin connectors\u003c\/li\u003e \u003cli\u003ePVC injection-molding inner core with rubber molded outer cover\u003c\/li\u003e \u003cli\u003e Fire-retardant and oil-resistant cable with protected Parallel \/ Series wiring mark\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cp\u003eYS-4.0 is suited to theatrical lighting, stage dimmer circuits, fixture pairing, rental-house cable kits, and controlled twofer use where two instruments need to be connected from one channel with the correct wiring method.\u003c\/p\u003e \u003ch3\u003e Compatibility\u003c\/h3\u003e \u003cp\u003eUse YS-4.0 only with lighting instruments, connectors, dimmer channels, and load plans appropriate for parallel wiring and 3 x 4.0 mm² cable. Check circuit behavior before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"YS-4.0\" data-category=\"Power Solution\"\u003e \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eIs YS-4.0 parallel or series wired?\u003c\/h3\u003e  \u003cp\u003eYS-4.0 is parallel wired.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhy is the wiring label important?\u003c\/h3\u003e  \u003cp\u003eParallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv class=\"kupo-faq-seo-item\"\u003e  \u003ch3\u003eWhat connector style is on this version?\u003c\/h3\u003e  \u003cp\u003eStage pin connectors\u003c\/p\u003e \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KUPO YS-4.0 Single Phase Y-Splitter - 3 x 4.0 mm² Parallel\",  \"sku\": \"YS-4.0\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"category\": \"Power Solution \u003e Power Cables\",  \"description\": \"KUPO YS-4.0 is a 1 m single-phase Y-splitter with 3 x 4.0 mm² H07RN-F rubber cable, parallel wiring, and Stage pin connectors.\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Single-phase Y-splitter \/ two-fer cable\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Connectors\",      \"value\": \"Stage pin connectors\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable\",      \"value\": \"3 x 4.0 mm² H07RN-F\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length\",      \"value\": \"1 m\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Construction\",      \"value\": \"PVC inner core + rubber outer cover\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Wiring\",      \"value\": \"Parallel\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Cable Properties\",      \"value\": \"Fire retardant, oil resistant\"    }  ],  \"mpn\": \"YS-4.0\",  \"productID\": \"YS-4.0\"}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{ \"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [  {   \"@type\": \"Question\",   \"name\": \"Is YS-4.0 parallel or series wired?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"YS-4.0 is parallel wired.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"Why is the wiring label important?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Parallel and series twofers change circuit behavior, so the visible label helps crews avoid using the wrong splitter on a dimmer channel.\"   }  },  {   \"@type\": \"Question\",   \"name\": \"What connector style is on this version?\",   \"acceptedAnswer\": {    \"@type\": \"Answer\",    \"text\": \"Stage pin connectors\"   }  } ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Power \/ Data Distro \/ Y-Splitter \/ 1-Phase","offer_id":53907625771307,"sku":"YS-4.0","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/YS-4.0_b.jpg?v=1782112327"}],"url":"https:\/\/kupostage.com\/collections\/cable_assembly.oembed?page=2","provider":"KUPO Stage","version":"1.0","type":"link"}