{"title":"Telescopic Hanger","description":"","products":[{"product_id":"klhb-0103","title":"KLHB-0103 - Short telescopic hanger, baby pin","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhb-0103-short-lightweight-telescopic-hanger-baby-pin.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHB-0103\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHB-0103 is a short lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\" (16 mm) baby pin where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eLightweight fixtures often need a small drop from pipe without bringing in a full-size hanger. This baby pin version gives LED panels, fluorescents, and compact lights a familiar receiver-to-pin workflow.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 1.5 feet to 3 feet (53.3 cm to 91.4 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 5\/8\" (16 mm) baby pin with a 1\/4-20 female thread on top; choose the KLHS stirrup-head version for fixtures with their own integrated clamp.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHB-0103 - Short telescopic hanger, baby pin\",  \"description\": \"The KLHB-0103 is a short lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\\\" (16 mm) baby pin where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHB-0103\",  \"mpn\": \"KLHB-0103\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Short telescopic hanger, baby pin\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"2.5 kg (5.5 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"1.5 feet to 3 feet (53.3 cm to 91.4 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"5\/8\\\" (16 mm) baby pin with 1\/4-20 female thread\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the baby pin version?\u003c\/h3\u003e    \u003cp\u003ePick the baby pin version when the fixture has a 5\/8\" receiver or when the accessory stack is built around baby hardware.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the baby pin version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the baby pin version when the fixture has a 5\/8\\\" receiver or when the accessory stack is built around baby hardware.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Baby Pin","offer_id":53907539657003,"sku":"KLHB-0103","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHB-0103_b.jpg?v=1782111387"},{"product_id":"klhb-0204","title":"KLHB-0204 - Medium telescopic hanger, baby pin","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhb-0204-medium-lightweight-telescopic-hanger-baby-pin.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHB-0204\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHB-0204 is a medium lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\" (16 mm) baby pin where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eLightweight fixtures often need a small drop from pipe without bringing in a full-size hanger. This baby pin version gives LED panels, fluorescents, and compact lights a familiar receiver-to-pin workflow.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 2 feet to 4 feet (68.8 cm to 121.9 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 5\/8\" (16 mm) baby pin with a 1\/4-20 female thread on top; choose the KLHS stirrup-head version for fixtures with their own integrated clamp.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHB-0204 - Medium telescopic hanger, baby pin\",  \"description\": \"The KLHB-0204 is a medium lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\\\" (16 mm) baby pin where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHB-0204\",  \"mpn\": \"KLHB-0204\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Medium telescopic hanger, baby pin\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"2.8 kg (6.16 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"2 feet to 4 feet (68.8 cm to 121.9 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"5\/8\\\" (16 mm) baby pin with 1\/4-20 female thread\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the baby pin version?\u003c\/h3\u003e    \u003cp\u003ePick the baby pin version when the fixture has a 5\/8\" receiver or when the accessory stack is built around baby hardware.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the baby pin version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the baby pin version when the fixture has a 5\/8\\\" receiver or when the accessory stack is built around baby hardware.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Baby Pin","offer_id":53907539722539,"sku":"KLHB-0204","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHB-0204_b.jpg?v=1782111388"},{"product_id":"klhb-0306","title":"KLHB-0306 - Long telescopic hanger, baby pin","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhb-0306-long-lightweight-telescopic-hanger-baby-pin.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHB-0306\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHB-0306 is a long lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\" (16 mm) baby pin where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eLightweight fixtures often need a small drop from pipe without bringing in a full-size hanger. This baby pin version gives LED panels, fluorescents, and compact lights a familiar receiver-to-pin workflow.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 3 feet to 6 feet (91.4 cm to 182.8 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 5\/8\" (16 mm) baby pin with a 1\/4-20 female thread on top; choose the KLHS stirrup-head version for fixtures with their own integrated clamp.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHB-0306 - Long telescopic hanger, baby pin\",  \"description\": \"The KLHB-0306 is a long lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 5\/8\\\" (16 mm) baby pin where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHB-0306\",  \"mpn\": \"KLHB-0306\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Long telescopic hanger, baby pin\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"3.2 kg (7.04 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"3 feet to 6 feet (91.4 cm to 182.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"5\/8\\\" (16 mm) baby pin with 1\/4-20 female thread\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the baby pin version?\u003c\/h3\u003e    \u003cp\u003ePick the baby pin version when the fixture has a 5\/8\" receiver or when the accessory stack is built around baby hardware.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the baby pin version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the baby pin version when the fixture has a 5\/8\\\" receiver or when the accessory stack is built around baby hardware.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Baby Pin","offer_id":53907539820843,"sku":"KLHB-0306","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHB-0306_b.jpg?v=1782111389"},{"product_id":"klhs-0103","title":"KLHS-0103 - Short Lightweight Telescopic Hanger with Stirrup head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhs-0103-short-lightweight-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHS-0103\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHS-0103 is a short lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eSome fixtures already carry their own clamp or yoke hardware. The stirrup head version is for those setups, giving the fixture a direct hanger end without forcing a baby-pin adapter into the rig.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 1.74 feet to 3 feet (53.3 cm to 91.4 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 40 mm stirrup head; choose the KLHB baby-pin version for fixtures with a 5\/8\" receiver.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHS-0103 - Short Lightweight Telescopic Hanger with Stirrup head\",  \"description\": \"The KLHS-0103 is a short lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHS-0103\",  \"mpn\": \"KLHS-0103\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Short telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"3 kg (7.62 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"1.74 feet to 3 feet (53.3 cm to 91.4 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the stirrup head version?\u003c\/h3\u003e    \u003cp\u003ePick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the stirrup head version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907539853611,"sku":"KLHS-0103","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHS-0103_b.jpg?v=1782111390"},{"product_id":"klhs-0204","title":"KLHS-0204 - Medium Lightweight Telescopic Hanger with Stirrup head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhs-0204-medium-lightweight-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHS-0204\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHS-0204 is a medium lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eSome fixtures already carry their own clamp or yoke hardware. The stirrup head version is for those setups, giving the fixture a direct hanger end without forcing a baby-pin adapter into the rig.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 2 feet to 4 feet (68.8 cm to 121.9 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 40 mm stirrup head; choose the KLHB baby-pin version for fixtures with a 5\/8\" receiver.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHS-0204 - Medium Lightweight Telescopic Hanger with Stirrup head\",  \"description\": \"The KLHS-0204 is a medium lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHS-0204\",  \"mpn\": \"KLHS-0204\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Medium telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"3.6 kg (7.92 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"2 feet to 4 feet (68.8 cm to 121.9 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the stirrup head version?\u003c\/h3\u003e    \u003cp\u003ePick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the stirrup head version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907539951915,"sku":"KLHS-0204","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHS-0204_b.jpg?v=1782111391"},{"product_id":"klhs-0306","title":"KLHS-0306 - Long Lightweight Telescopic Hanger with Stirrup head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: klhs-0306-long-lightweight-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KLHS-0306\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KLHS-0306 is a long lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eSome fixtures already carry their own clamp or yoke hardware. The stirrup head version is for those setups, giving the fixture a direct hanger end without forcing a baby-pin adapter into the rig.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e15 kg (33 lb) Working Load Limit (WLL) suits lightweight fluorescent fixtures, LED lights, and compact production loads.\u003c\/li\u003e    \u003cli\u003eTelescopic length range of 3 feet to 6 feet (91.4 cm to 182.8 cm) lets crews set the drop precisely for the room and fixture position.\u003c\/li\u003e    \u003cli\u003eIntegrated iron casting clamp grips 35-65 mm pipe for use on common studio and venue overhead structures.\u003c\/li\u003e    \u003cli\u003eSafety wire on the column and quick-release ball safety pin help control the riser and clamp during adjustment.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUseful for studio pipe grids, low-profile lighting drops, small LED panels, fluorescent fixtures, theater electrics, broadcast rooms, and location rigs where a light needs to hang below an overhead pipe.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eThe end uses a 40 mm stirrup head; choose the KLHB baby-pin version for fixtures with a 5\/8\" receiver.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KLHS-0306 - Long Lightweight Telescopic Hanger with Stirrup head\",  \"description\": \"The KLHS-0306 is a long lightweight telescopic hanger for mounting fixtures under 15 kg from overhead pipe. Its matt black powder-coated solid steel body clamps to 35-65 mm pipe, then extends through a controlled telescopic range to place a 40 mm stirrup head where the light needs to hang.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KLHS-0306\",  \"mpn\": \"KLHS-0306\",  \"color\": \"Single\",  \"material\": \"Solid steel, matt black powder coat\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Long telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"15 kg (33 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Solid steel, matt black powder coat\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"4 kg (8.8 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"3 feet to 6 feet (91.4 cm to 182.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Pipe Clamp Range\",      \"value\": \"35-65 mm (1.5\\\" to 2.5\\\")\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety wire + ball safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWill it clamp to standard studio pipe?\u003c\/h3\u003e    \u003cp\u003eIt accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I pick the stirrup head version?\u003c\/h3\u003e    \u003cp\u003ePick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping during adjustment?\u003c\/h3\u003e    \u003cp\u003eThe hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Will it clamp to standard studio pipe?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"It accepts pipe from 35-65 mm outside diameter, covering many common overhead pipe and grid applications.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I pick the stirrup head version?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Pick the stirrup head version when the fixture already has its own clamp or mounting hardware meant to sit on a stirrup head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping during adjustment?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hanger uses a quick-release ball safety pin, plus a safety wire on the column to help keep the clamp from coming free.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907539984683,"sku":"KLHS-0306","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KLHS-0306_b.jpg?v=1782111392"},{"product_id":"ks-215","title":"KS-215 - Stirrup Head (Silver)","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: ks-215-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KS-215\" data-color=\"Silver\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KS-215 Stirrup Head is a stand-alone hanger head for lighting fixtures fitted with their own clamp or coupler. Built from 5 mm gauge aluminum alloy and welded to a 50 mm diameter tube, it provides a 40 mm stirrup head with a 100 kg Working Load Limit (WLL) for fixture mounting where a pin-style receiver is not the right interface.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eSome fixtures need to clamp onto a stirrup rather than sit on a baby pin or junior receiver. This head provides that clean handoff point for telescopic hangers and drop-pole setups.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e100 kg Working Load Limit (WLL) covers a wide range of lightweight and mid-weight fixture applications.\u003c\/li\u003e    \u003cli\u003e40 mm stirrup head gives clamp-equipped fixtures a direct mounting surface.\u003c\/li\u003e    \u003cli\u003e12.5 mm mounting hole accepts a telescopic hanger or drop pole.\u003c\/li\u003e    \u003cli\u003e5 mm gauge welded aluminum alloy construction balances strength with manageable weight.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for theatrical fixtures, broadcast studios, architectural installations, telescopic hanger replacements, and lighting fixtures whose own clamp mounts directly to a stirrup-style head.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eDesigned for fixtures with clamps or couplers that mount to a 40 mm stirrup head; the bracket includes a 12.5 mm mounting hole for compatible hangers or drop poles.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KS-215 - Stirrup Head (Silver)\",  \"description\": \"The KS-215 Stirrup Head is a stand-alone hanger head for lighting fixtures fitted with their own clamp or coupler. Built from 5 mm gauge aluminum alloy and welded to a 50 mm diameter tube, it provides a 40 mm stirrup head with a 100 kg Working Load Limit (WLL) for fixture mounting where a pin-style receiver is not the right interface.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KS-215\",  \"mpn\": \"KS-215\",  \"color\": \"Silver\",  \"material\": \"5 mm gauge aluminum alloy, welded\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"100 kg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"5 mm gauge aluminum alloy, welded\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Silver\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube\",      \"value\": \"50 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Bracket Dimensions\",      \"value\": \"198 mm x 204 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Stirrup Head Diameter\",      \"value\": \"40 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Mounting Hole\",      \"value\": \"12.5 mm diameter\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eIs this for fixtures with their own clamp?\u003c\/h3\u003e    \u003cp\u003eYes. It is for fixtures that clamp onto a stirrup-style head rather than mount onto a pin or receiver.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003e Can it be used as a replacement head?\u003c\/h3\u003e    \u003cp\u003eYes, when the hanger or drop pole accepts the 12.5 mm mounting hole and the load stays within rating.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat is the difference between the silver and black versions?\u003c\/h3\u003e    \u003cp\u003eThe hardware function is the same; the black version is chosen when the head should be less visible in the rig.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Is this for fixtures with their own clamp?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Yes. It is for fixtures that clamp onto a stirrup-style head rather than mount onto a pin or receiver.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"Can it be used as a replacement head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Yes, when the hanger or drop pole accepts the 12.5 mm mounting hole and the load stays within rating.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What is the difference between the silver and black versions?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hardware function is the same; the black version is chosen when the head should be less visible in the rig.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head Accessory","offer_id":53907560825131,"sku":"KS-215","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KS-215_b.jpg?v=1782111607"},{"product_id":"ks-215b","title":"KS-215B - Stirrup Head (Black)","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: ks-215b-stirrup-head-black.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KS-215B\" data-color=\"Black\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KS-215B Stirrup Head is a stand-alone hanger head for lighting fixtures fitted with their own clamp or coupler. Built from 5 mm gauge aluminum alloy and welded to a 50 mm diameter tube, it provides a 40 mm stirrup head with a 100 kg Working Load Limit (WLL) for fixture mounting where a pin-style receiver is not the right interface.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eBlack hardware matters when the hanger head sits in view of a camera, audience, or architectural ceiling. This version gives the same stirrup function while visually disappearing into darker rigs.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e100 kg Working Load Limit (WLL) covers a wide range of lightweight and mid-weight fixture applications.\u003c\/li\u003e    \u003cli\u003e40 mm stirrup head gives clamp-equipped fixtures a direct mounting surface.\u003c\/li\u003e    \u003cli\u003e12.5 mm mounting hole accepts a telescopic hanger or drop pole.\u003c\/li\u003e    \u003cli\u003e5 mm gauge welded aluminum alloy construction balances strength with manageable weight.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for theatrical fixtures, broadcast studios, architectural installations, telescopic hanger replacements, and lighting fixtures whose own clamp mounts directly to a stirrup-style head.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eDesigned for fixtures with clamps or couplers that mount to a 40 mm stirrup head; the bracket includes a 12.5 mm mounting hole for compatible hangers or drop poles.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KS-215B - Stirrup Head (Black)\",  \"description\": \"The KS-215B Stirrup Head is a stand-alone hanger head for lighting fixtures fitted with their own clamp or coupler. Built from 5 mm gauge aluminum alloy and welded to a 50 mm diameter tube, it provides a 40 mm stirrup head with a 100 kg Working Load Limit (WLL) for fixture mounting where a pin-style receiver is not the right interface.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KS-215B\",  \"mpn\": \"KS-215B\",  \"color\": \"Black\",  \"material\": \"5 mm gauge aluminum alloy, welded\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"100 kg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"5 mm gauge aluminum alloy, welded\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Finish\",      \"value\": \"Black\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube\",      \"value\": \"50 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Bracket Dimensions\",      \"value\": \"198 mm x 204 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Stirrup Head Diameter\",      \"value\": \"40 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Mounting Hole\",      \"value\": \"12.5 mm diameter\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eIs this for fixtures with their own clamp?\u003c\/h3\u003e    \u003cp\u003eYes. It is for fixtures that clamp onto a stirrup-style head rather than mount onto a pin or receiver.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003e Can it be used as a replacement head?\u003c\/h3\u003e    \u003cp\u003eYes, when the hanger or drop pole accepts the 12.5 mm mounting hole and the load stays within rating.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat is the difference between the silver and black versions?\u003c\/h3\u003e    \u003cp\u003eThe hardware function is the same; the black version is chosen when the head should be less visible in the rig.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"Is this for fixtures with their own clamp?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Yes. It is for fixtures that clamp onto a stirrup-style head rather than mount onto a pin or receiver.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"Can it be used as a replacement head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"Yes, when the hanger or drop pole accepts the 12.5 mm mounting hole and the load stays within rating.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What is the difference between the silver and black versions?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The hardware function is the same; the black version is chosen when the head should be less visible in the rig.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head Accessory","offer_id":53907561152811,"sku":"KS-215B","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KS-215B_b.jpg?v=1782111608"},{"product_id":"kths-0306","title":"KTHS-0306 - Short Telescopic Hanger with Stirrup Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kths-0306-short-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHS-0306\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHS-0306 Short Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 3 feet to 6 feet (91.4 cm to 182.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe stirrup head is for fixtures that already have their own clamp or coupler. It gives those fixtures a direct overhead mounting surface without adding another adapter.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e40 mm stirrup head accepts fixtures whose own clamps mount directly to the hanger head.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead uses a 40 mm stirrup interface for fixtures with their own clamp; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHS-0306 - Short Telescopic Hanger with Stirrup Head\",  \"description\": \"The KTHS-0306 Short Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 3 feet to 6 feet (91.4 cm to 182.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHS-0306\",  \"mpn\": \"KTHS-0306\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Short telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"40 kg (88 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"5.3 kg (11.7 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"3 feet to 6 feet (91.4 cm to 182.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety pin prevents riser slipping\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the stirrup head?\u003c\/h3\u003e    \u003cp\u003e Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the stirrup head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907564888363,"sku":"KTHS-0306","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHS-0306_b.jpg?v=1782111661"},{"product_id":"kths-0408","title":"KTHS-0408 - Medium Telescopic Hanger with Stirrup Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kths-0408-medium-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHS-0408\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHS-0408 Medium Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 4 feet to 8 feet (121.9 cm to 246.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe stirrup head is for fixtures that already have their own clamp or coupler. It gives those fixtures a direct overhead mounting surface without adding another adapter.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e40 mm stirrup head accepts fixtures whose own clamps mount directly to the hanger head.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead uses a 40 mm stirrup interface for fixtures with their own clamp; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHS-0408 - Medium Telescopic Hanger with Stirrup Head\",  \"description\": \"The KTHS-0408 Medium Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 4 feet to 8 feet (121.9 cm to 246.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHS-0408\",  \"mpn\": \"KTHS-0408\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Medium telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"40 kg (88 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"6 kg (13.2 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"4 feet to 8 feet (121.9 cm to 246.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety pin prevents riser slipping\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the stirrup head?\u003c\/h3\u003e    \u003cp\u003e Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the stirrup head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907564953899,"sku":"KTHS-0408","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHS-0408_b.jpg?v=1782111661"},{"product_id":"kths-0510","title":"KTHS-0510 - Long Telescopic Hanger with Stirrup Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kths-0510-long-telescopic-hanger-stirrup-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHS-0510\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHS-0510 Long Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 5 feet to 10 feet (152.4 cm to 304.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe stirrup head is for fixtures that already have their own clamp or coupler. It gives those fixtures a direct overhead mounting surface without adding another adapter.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003e40 mm stirrup head accepts fixtures whose own clamps mount directly to the hanger head.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead uses a 40 mm stirrup interface for fixtures with their own clamp; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHS-0510 - Long Telescopic Hanger with Stirrup Head\",  \"description\": \"The KTHS-0510 Long Telescopic Hanger with Stirrup Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 5 feet to 10 feet (152.4 cm to 304.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHS-0510\",  \"mpn\": \"KTHS-0510\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Long telescopic hanger with stirrup head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Working Load Limit\",      \"value\": \"40 kg (88 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"6.7 kg (14.8 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"5 feet to 10 feet (152.4 cm to 304.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"Stirrup head, 40 mm diameter\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety pin prevents riser slipping\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the stirrup head?\u003c\/h3\u003e    \u003cp\u003e Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the stirrup head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the stirrup head when the fixture has its own clamp and needs to mount directly to a 40 mm head.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Stirrup Head","offer_id":53907564986667,"sku":"KTHS-0510","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHS-0510_b.jpg?v=1782111662"},{"product_id":"kthu-0306","title":"KTHU-0306 - Short Telescopic Hanger with Universal Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kthu-0306-short-telescopic-hanger-universal-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHU-0306\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHU-0306 Short Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 3 feet to 6 feet (91.4 cm to 182.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe universal head is for crews who do not want to choose between baby-pin and junior-receiver fixtures before the hang. It provides both interfaces on one head, with different load limits for each.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003eUniversal head provides both a 5\/8\" (16 mm) baby pin and a 28 mm junior receiver.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead includes a 5\/8\" baby pin rated to 10 kg and a 28 mm junior receiver rated to 40 kg; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHU-0306 - Short Telescopic Hanger with Universal Head\",  \"description\": \"The KTHU-0306 Short Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 3 feet to 6 feet (91.4 cm to 182.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHU-0306\",  \"mpn\": \"KTHU-0306\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Short telescopic hanger with universal head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 28 mm Receiver\",      \"value\": \"40 kg \/ 88 lb\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 16 mm Pin\",      \"value\": \"10 kg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"5.3 kg (11.7 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"3 feet to 6 feet (91.4 cm to 182.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"16 mm baby + 28 mm junior\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Linch pin + riser safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the universal head?\u003c\/h3\u003e    \u003cp\u003e Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the universal head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Universal Head","offer_id":53907565084971,"sku":"KTHU-0306","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHU-0306_b.jpg?v=1782111663"},{"product_id":"kthu-0408","title":"KTHU-0408 - Medium Telescopic Hanger with Universal Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kthu-0408-medium-telescopic-hanger-universal-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHU-0408\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHU-0408 Medium Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 4 feet to 8 feet (121.9 cm to 246.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe universal head is for crews who do not want to choose between baby-pin and junior-receiver fixtures before the hang. It provides both interfaces on one head, with different load limits for each.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003eUniversal head provides both a 5\/8\" (16 mm) baby pin and a 28 mm junior receiver.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead includes a 5\/8\" baby pin rated to 10 kg and a 28 mm junior receiver rated to 40 kg; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHU-0408 - Medium Telescopic Hanger with Universal Head\",  \"description\": \"The KTHU-0408 Medium Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 4 feet to 8 feet (121.9 cm to 246.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHU-0408\",  \"mpn\": \"KTHU-0408\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Medium telescopic hanger with universal head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 28 mm Receiver\",      \"value\": \"40 kg \/ 88 lb\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 16 mm Pin\",      \"value\": \"10 kg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"6 kg (13.2 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"4 feet to 8 feet (121.9 cm to 246.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"16 mm baby + 28 mm junior\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Linch pin + riser safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the universal head?\u003c\/h3\u003e    \u003cp\u003e Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the universal head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Universal Head","offer_id":53907565183275,"sku":"KTHU-0408","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHU-0408_b.jpg?v=1782111664"},{"product_id":"kthu-0510","title":"KTHU-0510 - Long Telescopic Hanger with Universal Head","description":"\u003c!-- Sub-type: H-D --\u003e\u003c!-- Source: kthu-0510-long-telescopic-hanger-universal-head.md --\u003e\u003cstyle\u003e.kupo-section-title {  margin: 1.25rem 0 1rem 0;  font-size: 22px !important;  font-weight: 700;  line-height: 1.3;  color: #2C3E50 !important;  letter-spacing: 0;}.product-description h3 {  color: #2C3E50 !important;  font-size: 18px !important;  font-weight: bold;  margin-top: 1.5rem;  margin-bottom: 0.75rem;  line-height: 1.35;  letter-spacing: 0;}.product-description,.product-description p,.product-description li {  color: #222222 !important;}\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHU-0510\" data-color=\"Single\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KTHU-0510 Long Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 5 feet to 10 feet (152.4 cm to 304.8 cm) working range for overhead positioning.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eThe universal head is for crews who do not want to choose between baby-pin and junior-receiver fixtures before the hang. It provides both interfaces on one head, with different load limits for each.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003eUniversal head provides both a 5\/8\" (16 mm) baby pin and a 28 mm junior receiver.\u003c\/li\u003e    \u003cli\u003e40 kg (88 lb) Working Load Limit (WLL) supports junior-receiver or stirrup-head fixture use.\u003c\/li\u003e    \u003cli\u003ePatented quick-release clamp grips 25-55 mm tube with push-to-lock operation.\u003c\/li\u003e    \u003cli\u003eSafety pin prevents the riser from slipping during overhead use.\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse for overhead lighting positions, studio grids, theatrical hangs, venue installations, temporary production rigs, and situations where floor stands would block movement or sightlines.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003eHead includes a 5\/8\" baby pin rated to 10 kg and a 28 mm junior receiver rated to 40 kg; clamp fits 25-55 mm tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHU-0510 - Long Telescopic Hanger with Universal Head\",  \"description\": \"The KTHU-0510 Long Telescopic Hanger with Universal Head suspends lighting fixtures and equipment overhead while keeping the floor below clear. Built from chrome-plated steel, it clamps to 25-55 mm tubes with KUPO's patented quick-release clamp and extends through a 5 feet to 10 feet (152.4 cm to 304.8 cm) working range for overhead positioning.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\"  },  \"category\": \"Hardware Solution \u003e Brackets \u0026 Hangers\",  \"sku\": \"KTHU-0510\",  \"mpn\": \"KTHU-0510\",  \"color\": \"Single\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"Long telescopic hanger with universal head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 28 mm Receiver\",      \"value\": \"40 kg \/ 88 lb\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 16 mm Pin\",      \"value\": \"10 kg\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"6.7 kg (14.8 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"5 feet to 10 feet (152.4 cm to 304.8 cm)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"16 mm baby + 28 mm junior\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Linch pin + riser safety pin\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo {  margin-top: 2rem;}.kupo-faq-seo h3 {  color: #2C3E50 !important;  font-size: 17px !important;  font-weight: 600;  margin: 1.25rem 0 0.5rem 0;  line-height: 1.35;  letter-spacing: 0;}.kupo-faq-seo p {  color: #222222 !important;  margin: 0 0 1rem 0;}\u003c\/style\u003e\u003csection class=\"kupo-faq-seo\"\u003e  \u003ch2 class=\"kupo-section-title\"\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size can the clamp grip?\u003c\/h3\u003e    \u003cp\u003eThe patented quick-release clamp grips tubes from 25 mm to 55 mm.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhen should I choose the universal head?\u003c\/h3\u003e    \u003cp\u003e Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat keeps the riser from slipping?\u003c\/h3\u003e    \u003cp\u003eA safety pin prevents the telescoping riser from slipping during use.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"FAQPage\",  \"mainEntity\": [    {      \"@type\": \"Question\",      \"name\": \"What tube size can the clamp grip?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"The patented quick-release clamp grips tubes from 25 mm to 55 mm.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"When should I choose the universal head?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \" Choose the universal head when the fixture may use either a 16 mm baby pin or a 28 mm junior receiver.\"      }    },    {      \"@type\": \"Question\",      \"name\": \"What keeps the riser from slipping?\",      \"acceptedAnswer\": {        \"@type\": \"Answer\",        \"text\": \"A safety pin prevents the telescoping riser from slipping during use.\"      }    }  ]}\u003c\/script\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Universal Head","offer_id":53907565248811,"sku":"KTHU-0510","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHU-0510_b.jpg?v=1782111666"},{"product_id":"kthu-0712","title":"KTHU-0712 - KUPO Telescopic Hanger","description":"\u003c!-- Sub-type: H-D (Brackets and hangers) --\u003e\u003c!-- Source: Description\/Missing_Markdown\/Hardware Solution\/kthu-0712-telescopic-hangers.md --\u003e\u003cstyle\u003e.kupo-section-title { margin: 1.25rem 0 1rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.3; color: #2C3E50 !important; letter-spacing: 0; }.product-description h3 { color: #2C3E50 !important; font-size: 18px !important; font-weight: bold; margin-top: 1.5rem; margin-bottom: 0.75rem; line-height: 1.35; letter-spacing: 0; }.product-description, .product-description p, .product-description li { color: #222222 !important; }\u003c\/style\u003e\u003ch2 class=\"kupo-section-title\"\u003eProduct Description\u003c\/h2\u003e\u003cdiv class=\"product-description\" data-sku=\"KTHU-0712\" data-color=\"NA\"\u003e  \u003ch3\u003eOverview\u003c\/h3\u003e  \u003cp\u003eThe KUPO KTHU-0712 is a telescopic hanger for suspending lighting fixtures overhead while keeping the floor clear. It combines chrome-plated steel construction, a quick action clamp for 25 to 55 mm tube, a safety pin, safety cable, and a triple-function universal stand top with 16 mm receiver, 16 mm stud, and 28 mm receiver.\u003c\/p\u003e  \u003ch3\u003eWhy It Matters\u003c\/h3\u003e  \u003cp\u003eA telescopic hanger solves a very specific venue problem: the light needs to be overhead, but a floor stand is in the way. KTHU-0712 gives installers an adjustable 213 to 366 cm hanging length and a universal top that can accept both junior and baby style fixture connections.\u003c\/p\u003e  \u003ch3\u003eKey Features\u003c\/h3\u003e  \u003cul\u003e    \u003cli\u003eTelescopic working length adjusts from 213 cm to 366 cm for overhead fixture positioning\u003c\/li\u003e    \u003cli\u003eQuick action clamp fits 25 to 55 mm tube, making the hanger practical for common grid and pipe layouts\u003c\/li\u003e    \u003cli\u003eTriple-function universal stand top supports 16 mm receiver, 16 mm stud, and 28 mm receiver connections\u003c\/li\u003e    \u003cli\u003eSafety pin helps prevent riser slip, with safety cable included for proper overhead practice\u003c\/li\u003e    \u003cli\u003e Chrome-plated steel construction gives the hanger durability for venue and industrial use\u003c\/li\u003e  \u003c\/ul\u003e  \u003ch3\u003eApplications\u003c\/h3\u003e  \u003cp\u003eUse it in theatres, studios, ballrooms, venues, houses of worship, and industrial spaces where fixtures need to hang from an overhead tube while leaving the floor unobstructed.\u003c\/p\u003e  \u003ch3\u003e Compatibility\u003c\/h3\u003e  \u003cp\u003e Clamps to 25 to 55 mm tube. Junior receiver loading weight is 40 kg, and baby pin loading weight is 10 kg.\u003c\/p\u003e\n\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{  \"@context\": \"https:\/\/schema.org\",  \"@type\": \"Product\",  \"name\": \"KTHU-0712 | KUPO Telescopic Hanger\",  \"description\": \"The KUPO KTHU-0712 is a telescopic hanger for suspending lighting fixtures overhead while keeping the floor clear. It combines chrome-plated steel construction, a quick action clamp for 25 to 55 mm tube, a safety pin, safety cable, and a triple-function universal stand top with 16 mm receiver, 16 mm stud, and 28 mm receiver.\",  \"brand\": {    \"@type\": \"Brand\",    \"name\": \"KUPO\"  },  \"manufacturer\": {    \"@type\": \"Organization\",    \"name\": \"KUPO CO. LTD\",    \"url\": \"https:\/\/www.stage.com.tw\"  },  \"category\": \"Hardware Solution \u003e Telescopic Hangers\",  \"sku\": \"KTHU-0712\",  \"mpn\": \"KTHU-0712\",  \"material\": \"Steel, chrome plated\",  \"additionalProperty\": [    {      \"@type\": \"PropertyValue\",      \"name\": \"Product Type\",      \"value\": \"XL telescopic hanger, universal head\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 28 mm Receiver\",      \"value\": \"40 kg \/ 88 lb\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"WLL on 16 mm Pin\",      \"value\": \"10 kg \/ 22 lb\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Material\",      \"value\": \"Steel, chrome plated\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Weight\",      \"value\": \"7 kg (15.4 lb)\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Length Range\",      \"value\": \"213 cm to 366 cm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Tube Clamp Range\",      \"value\": \"25-55 mm\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Head\",      \"value\": \"16 mm receiver \/ stud + 28 mm receiver\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Safety\",      \"value\": \"Safety cable and safety pin\"    },    {      \"@type\": \"PropertyValue\",      \"name\": \"Column Diameters\",      \"value\": \"35 mm, 30 mm\"    }  ]}\u003c\/script\u003e\u003cstyle\u003e.kupo-faq-seo-block { margin: 3rem 0 0 0; padding: 0; border: 0; background: transparent; box-sizing: border-box; }.kupo-faq-seo-block h2 { margin: 0 0 1.6rem 0; font-size: 22px !important; font-weight: 700; line-height: 1.4; color: #2C3E50 !important; }.kupo-faq-seo-item { border-top: 1px solid #ececec; padding: 0.8rem 0; }.kupo-faq-seo-item:first-of-type { border-top: 0; padding-top: 0; }.kupo-faq-seo-item h3 { margin: 0 0 0.35rem 0; font-size: 17px !important; font-weight: 600; line-height: 1.45; color: #2C3E50 !important; }.kupo-faq-seo-item p { margin: 0; line-height: 1.6; color: #222222 !important; }\u003c\/style\u003e\u003csection class=\"kupo-faq-seo-block\" data-product-id=\"KTHU-0712\" data-category=\"Hardware Solution\"\u003e  \u003ch2\u003e Frequently Asked Questions\u003c\/h2\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eDoes this replace a stand?\u003c\/h3\u003e    \u003cp\u003eIt replaces a floor stand only when the fixture can be properly suspended from an overhead tube. It is meant to clear floor space, not to avoid rated rigging practice.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003eWhat tube size does the clamp fit?\u003c\/h3\u003e    \u003cp\u003eThe quick action clamp fits tube from 25 to 55 mm. Match the overhead tube and structure are suitable before loading it.\u003c\/p\u003e  \u003c\/div\u003e  \u003cdiv class=\"kupo-faq-seo-item\"\u003e    \u003ch3\u003e Can I mount both baby and junior fixtures?\u003c\/h3\u003e    \u003cp\u003eYes. The included triple-function universal top provides 16 mm receiver, 16 mm stud, and 28 mm receiver options, with different load limits for the baby and junior connections.\u003c\/p\u003e  \u003c\/div\u003e\u003c\/section\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does this replace a stand?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It replaces a floor stand only when the fixture can be properly suspended from an overhead tube. It is meant to clear floor space, not to avoid rated rigging practice.\"}},{\"@type\":\"Question\",\"name\":\"What tube size does the clamp fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The quick action clamp fits tube from 25 to 55 mm. Match the overhead tube and structure are suitable before loading it.\"}},{\"@type\":\"Question\",\"name\":\"Can I mount both baby and junior fixtures?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The included triple-function universal top provides 16 mm receiver, 16 mm stud, and 28 mm receiver options, with different load limits for the baby and junior connections.\"}}]}\u003c\/script\u003e\u003c!-- Download block omitted: no confirmed spec sheet PDF for KTHU-0712 --\u003e","brand":"KUPO Stage","offers":[{"title":"Telescopic Hanger \/ Universal Head","offer_id":53907565576491,"sku":"KTHU-0712","price":0.0,"currency_code":"TWD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/6887\/6843\/files\/KTHU-0712_b.jpg?v=1782111667"}],"url":"https:\/\/kupostage.com\/collections\/telescopic-hanger.oembed","provider":"KUPO Stage","version":"1.0","type":"link"}