The KUPO CHC-11-1P is the matched handheld direct controller for the PL-200 single-phase wire winch. It gives the operator one clear channel of up/down travel control, a lockable emergency stop, and 1.7 m input and output cable runs for a simple winch-to-controller setup.
Why It Matters
A single winch should have a single obvious control path, especially in a busy stage environment. CHC-11-1P keeps the mapping clear and physical, with dedicated up/down push buttons and an emergency stop on the face of an impact-resistant controller body.
Key Features
Single-phase one-channel direct control keeps one controller dedicated to one PL-200 wire winch.
Lockable emergency stop gives the operator an immediate power cut point during a fault or snag.
Up and down push buttons provide simple travel direction control.
1.7 m input and output cables give practical working slack around the winch position.
Applications
Use for entertainment rigging, touring motor control, theatre hoist operation, corporate event truss moves, broadcast stages, and venue installations where controlled hoist movement is required.
Compatibility
Designed for the PL-200 single-phase wire winch.
Frequently Asked Questions
Which winch does CHC-11-1P control
It is the matched direct controller for the PL-200 single-phase wire winch.
Can one controller run more than one winch
No. This is a single-channel controller, so it is intended to drive one winch per unit.
Does it include an emergency stop
Yes. The controller face includes a lockable emergency stop.
Choosing a selection results in a full page refresh.
