Product Description
Overview
The KUPO MCA-1616P-200 is a 20 m four-channel hoist multicore cable that carries four motor channels in one trunk between a rack controller and a downstream breakout or panel. It uses Harting 16-pin plug on the source side and Harting 16-pin socket on the load side, reducing the number of individual motor tails that have to cross the rigging deck.
Why It Matters
The 20 m version gives Harting-based rigs the extra reach needed when the controller and breakout cannot live close together. It keeps four motor channels in one trunk while avoiding a chain of shorter cables.
Key Features
- 20 m length supports longer Harting trunk runs in ballroom, theatre, and arena layouts.
- Four motor channels travel in one cable, simplifying load-in and reducing loose tails.
- Harting 16-pin connector format matches the controller and breakout standard used in the rig.
- Male-to-female trunk format supports clean extension or panel-to-panel routing.
Additional Technical Notes
- Compatible System: RIGPRO rack controller systems and Harting 16-pin breakouts
- Cable Application: 4-motor trunk between rack controller and breakout or panel
Applications
Use for rack controller trunks, motor breakout runs, touring multicore stacks, theatre rigging, arena systems, and production inventories that group four hoist channels per cable.
Compatibility
RIGPRO + Harting 16-pin breakouts.
Frequently Asked Questions
How many motors can this multicore carry
It carries 4 motor channels per cable.
When would I choose this instead of four single CEE cables
Use a multicore when the controller and breakout layout benefits from one organized trunk instead of four separate motor tails.
How do I choose between the 10 mm and 20 m version
Use 10 mm when the rack and breakout are close in the same rigging zone, and 20 m when the run needs more reach across a venue or stage.