The KUPO PLS-SG21 PLS Support Grip is made to support and anchor a 19-pin cable run so the connector itself is not carrying the cable's weight. Its 1.2 mm stainless steel wire weave is sized for 18 to 21 mm cable outside diameter and rated for a 60 kg load capacity.
Why It Matters
This support grip is for taking cable weight off the connector itself, especially when a 19-pin run is hanging or anchored near truss. On touring and rental 19-pin cables, the connector shell is only part of the reliability story; the cable entry also needs to resist repeated handling, coiling, hanging, and strain.
Key Features
Supports and anchors 19-pin cable runs to reduce load on the connector
Fits cable O.D. from 18 to 21 mm
Woven from 1.2 mm stainless steel wire
Load capacity rated at 60 kg
Compatible with PLS 19-pin series cable systems
Applications
PLS-SG21 is suited to suspended or anchored 19-pin cable runs, truss positions, touring looms, rental-house cable prep, and any installation where the cable weight should be taken off the connector body.
Compatibility
Use PLS-SG21 with PLS 19-pin cable systems and cable O.D. from 18 to 21 mm. Check the support method and load path before hanging or anchoring a cable run.
Frequently Asked Questions
What does PLS-SG21 protect?
It supports the cable run so weight is not carried by the connector itself.
What cable size is PLS-SG21 for?
It is feasible for cable outside diameters from 18 to 21 mm.
Is it for the PLS 19-pin series?
Yes. The specification lists compatibility with the PLS 19-pin series.
Choosing a selection results in a full page refresh.
