The KUPO SW-01YP is the SW-01 safety wire format with an added yoke fixing plate. It uses a 3.2 mm, 7 x 19 galvanized steel wire rope, steel snap hook with eyelet, and aluminum ferrule termination, then adds the yoke plate so the safety bond can stay clearly assigned to a compatible lighting fixture.
Why It Matters
Secondary safety is easier to manage when the wire has an obvious home on the fixture. By fastening the plate to the fixture yoke, SW-01YP helps crews keep the safety wire with the light between load-ins, maintenance checks, and storage.
Key Features
10 kg working load limit for static fixture safety use
SW-01 style 3.2 mm, 7 x 19 galvanized steel wire rope with 75 cm length
Steel snap hook with eyelet and aluminum ferrule termination match the SW-01 safety-wire design
Yoke fixing plate creates a dedicated fastening point on compatible fixture yokes
Steel wire rope conforms to EN 12385-4
Applications
Use it as a secondary safety for static lighting fixtures where a yoke-mounted fixing plate helps keep the safety wire assigned to the fixture.
Compatibility
For securing static equipment only. It is not for lifting or hoisting; use the appropriate RIGPRO series product for hoisting applications.
Frequently Asked Questions
Is this safety wire for lifting?
No. SW-01YP is for securing static equipment only and must not be used for hoisting.
What does the yoke plate do?
The yoke fixing plate gives the safety bond a clear fastening point on a compatible fixture yoke, helping the wire stay assigned to that fixture.
Is SW-01YP the same standards package as SW-E01?
No. SW-01YP follows the SW-01 safety-wire design with an added yoke plate. For this model, the standards note is limited to the steel wire rope conforming to EN 12385-4.
Choosing a selection results in a full page refresh.
